Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Rösler Alu-Cast RAC-R
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Shot blasting material
Manufacturers & Suppliers
Rösler Oberflächentechnik GmbH
manufacturer
Hausen 1, 96231 Bad Staffelstein, Germany
+49/9533/924-0
http://www.rosler.com
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Aluminium particle
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| aluminium EC: 231-072-3 | --- | 50 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Seek medical treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Sand, Fire-extinguishing powder
Water, Water with full jet, Carbon dioxide
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow product to reach sewage system or any water course.
Pick up mechanically, avoid formation of dust, do not use a vacuum cleaner.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and direct sunlight.
Store in a cool location. Keep container tightly sealed. Store in cool, dry conditions in well sealed receptacles.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Not required. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
Dust mask, Filter P1, Filter P2
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
Flammable, burns to aluminium oxide.
Partly violent reaction with acids and alkalis to form hydrogen. Possible exotherme reaction with oxidizing agents-fire danger-exposure risk. Risk of dust explosion if enriched with fine dust in the presence of air.
No decomposition if used according to specifications.
acids, alkalis, oxidizing agents
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials.
Risk phrases: 10 Flammable. 15 Contact with water liberates extremely flammable gases. Safety phrases: 7/8 Keep container tightly closed and dry. 33 Take precautionary measures against static discharges. 43 In case of fire, use sand, carbon dioxide or powdered extinguishing agent. Never use water.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Rösler Alu-Cast RAC-R?
The signal word is na: r-phrases.
What is the physical form of Rösler Alu-Cast RAC-R?
Rösler Alu-Cast RAC-R is a powder appearing as matt grey / silver coloured with matt grey / silver coloured color. It has odourless odor.
What is the solubility of Rösler Alu-Cast RAC-R?
Insoluble.
What is Rösler Alu-Cast RAC-R used for?
Shot blasting material
What is the melting point of Rösler Alu-Cast RAC-R?
The melting point is 660°C and the boiling point is 2500°C.