ARBOCEL B 600 ZS 25

Provide fresh air. Get medical advice/attention if you feel unwell.

After contact with skin, wash immediately with plenty of water and soap. In case of skin irritation, consult a physician.

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.

Symptoms: Irritating to eyes.

Rinse mouth immediately and drink plenty of water. When in doubt or if symptoms are observed, get medical advice.

Water spray jet. Carbon dioxide. Foam. Extinguishing powder.

High power water jet.

In case of fire may be liberated: Carbon monoxide. Carbon dioxide. Pyrolysis products, toxic.

Do not allow run-off from fire-fighting to enter drains or water courses.

For non-emergency personnel: Avoid contact with skin and eyes. Wear breathing apparatus if exposed to vapours/dusts/aerosols. For emergency responders: Wear breathing apparatus if exposed to vapours/dusts/aerosols. Avoid contact with skin and eyes.

Do not allow to enter into surface water or drains.

Take up mechanically, placing in appropriate containers for disposal.

Materials: appropriate containers

If handled uncovered, arrangements with local exhaust ventilation should be used if possible. It is recommended to design all work processes always so that the following is excluded: Inhalation of dust/particles, Avoid contact with skin and eyes.

Keep container tightly closed in a cool, well-ventilated place. Protect against: Heating, frost, humidity.

Avoid contact with skin and eyes.

Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Have fire-extinguishers in readiness before opening containers.

Technical measures and the application of suitable work processes have priority over personal protection equipment.

Suitable material: CR (polychloroprene, chloroprene rubber). Thickness of the glove material: 0.5 mm. Breakthrough time (maximum wearing time): ≥ 8 h. Suitable material: NBR (nitrile rubber). Thickness of the glove material: 0.35 mm. Breakthrough time (maximum wearing time): ≥ 8 h. Suitable material: BR (butyl rubber). Thickness of the glove material: 0.5 mm. Breakthrough time (maximum wearing time): ≥ 8 h. Suitable material: FKM (fluorine rubber). Thickness of the glove material: 0.4 mm. Breakthrough time (maximum wearing time): ≥ 8 h. Suitable material: PVC (poly vinyl chloride). Thickness of the glove material: 0.5 mm. Breakthrough time (maximum wearing time): ≥ 8 h.

Eye glasses with side protection

Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Combination filtering device (DIN EN 141). Filter class: A-P2. The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be used!

For the protection against direct skin contact, body protective clothing is essential (in addition to the usual working clothes).

Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil.

No information available.

No information available.

No information available.

Decomposition takes place from temperatures above: approx. 170 °C

Oxidizing agents. Reducing agents. Alkali.

The product develops hydrogen in an aqueous solution in contact with metals. In case of fire may be liberated: Carbon monoxide. Carbon dioxide. Pyrolysis products, toxic.

Dispose of waste according to applicable legislation.

Dispose of waste according to applicable legislation.