NextSDS Logo
Safety Data Sheet EN

ARBOCEL B 600 ZS 25

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
ARBOCEL B 600 ZS 25
Chemical Name
Cellulose with citric acid

Regulatory Identifiers

CAS Number
N/A

Identified Uses

The product is intended for professional use.

Uses advised against

not relevant

Manufacturers & Suppliers

J. RETTENMAIER & SÖHNE GMBH + CO KG logo

J. RETTENMAIER & SÖHNE GMBH + CO KG

manufacturer

Holzmühle 1, D 73494 Rosenberg, Germany

+49 7967 152 0

www.jrs.de

Emergency Contacts

Emergency Contact

+49 7967 152 199

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H319 Causes serious eye irritation.

Precautionary Statements

P264 Wash .? thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/attention.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Cellulose EC: 232-674-9 9004-34-8 75% No
Citric acid EC: 201-069-1 77-92-9 25% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Provide fresh air. When in doubt or if symptoms are observed, get medical advice.

Skin contact

After contact with skin, wash immediately with plenty of water and soap. In case of skin irritation, consult a physician.

Eye contact

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.

Symptoms: Irritating to eyes.

Ingestion

Rinse mouth immediately and drink plenty of water. When in doubt or if symptoms are observed, get medical advice.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray jet. Carbon dioxide (CO2). Foam. Extinguishing powder.

Unsuitable media

High power water jet.

Specific hazards

In case of fire may be liberated: Carbon monoxide, Carbon dioxide (CO2), Pyrolysis products, toxic

Firefighter Protection

Wear a self-contained breathing apparatus and chemical protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

For non-emergency personnel: Avoid contact with skin and eyes. For emergency responders: Use personal protective equipment as required. Avoid contact with skin and eyes.

Environmental

Do not allow to enter into surface water or drains.

Cleanup methods

Take up mechanically, placing in appropriate containers for disposal. Wash with plenty of water.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with skin and eyes.

Storage

Keep container tightly closed in a cool, well-ventilated place. Protect against: Heating, frost.

Hygiene

Avoid contact with skin and eyes.

Fire prevention

Usual measures for fire prevention.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Technical measures and the application of suitable work processes have priority over personal protection equipment.

Hands

Suitable material: CR (polychloroprene, chloroprene rubber). Thickness of the glove material: 0.5 mm Breakthrough time (maximum wearing time): >= 8 h Suitable material: NBR (nitrile rubber). Thickness of the glove material: 0.35 mm Breakthrough time (maximum wearing time): >= 8 h Suitable material: BR (butyl rubber). Thickness of the glove material: 0.5 mm Breakthrough time (maximum wearing time): >= 8 h Suitable material: FKM (fluorine rubber). Thickness of the glove material: 0.4 mm Breakthrough time (maximum wearing time): >= 8 h Suitable material: PVC (poly vinyl chloride). Thickness of the glove material: 0.5 mm Breakthrough time (maximum wearing time): >= 8 h

Eyes

Eye glasses with side protection

Respiratory

Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Combination filtering device (DIN EN 141) Filter class: A-P2 Observe the wear time limits according GefStoffV in combination with the rules for using respiratory protection apparatus (BGR 190). The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be used!

Skin/Body

For the protection against direct skin contact, body protective clothing is essential (in addition to the usual working clothes).

Environmental

Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil. In case of gas escape or of entry into waterways, soil or drains, inform the responsible authorities.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Powder
Physical State Data
solid
State Under Standard Conditions
---
Appearance
Powder
Colour
whitish
Colour Intensity
---
Form
---
Odor
characteristic
Odor Threshold
not relevant
Ph
~ 2
Melting Point
not applicable
Boiling Point
not applicable
Flash Point
not determined
Freezing Point
not applicable
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
not applicable
Vapor Pressure
not applicable
Vapor Density
not applicable
Relative Density
---
Bulk Density
180 - 240 kg/m³
Density
approx. 1.5 g/cm³
Flammability
not relevant
Upper Explosive Limit
not relevant
Lower Explosive Limit
not relevant
Explosive Limits
---
Auto Ignition Temperature
not determined
Decomposition Temperature
approx. 170 °C
Solubility
---
Partition Coefficient
No data available
Solubility In Water
partially soluble
Solubility In Fat
insoluble
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
not applicable
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No information available.

Reactivity

No data available

Hazardous reactions

No information available.

Avoid

Decomposition takes place from temperatures above: approx. 170 °C

Incompatible

Alkali (lye), Oxidising agent

Decomposition

The product develops hydrogen in an aqueous solution in contact with metals. In case of fire may be liberated: Carbon monoxide, Carbon dioxide (CO2), Pyrolysis products, toxic

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for ARBOCEL B 600 ZS 25?

The signal word is warning.

What is the physical form of ARBOCEL B 600 ZS 25?

ARBOCEL B 600 ZS 25 is a powder appearing as powder with whitish color. It has characteristic odor.

What is ARBOCEL B 600 ZS 25 used for?

The product is intended for professional use.

What are the hazard statements for ARBOCEL B 600 ZS 25?

This substance has 1 hazard statement:

  • H319: Causes serious eye irritation.

What is the melting point of ARBOCEL B 600 ZS 25?

The melting point is not applicable and the boiling point is not applicable.