Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ARBOCEL B xx ZS
- Product Code
- ARBOCEL B 600 ZS, ARBOCEL BE 600-30 ZS, ARBOCEL B 800 ZS, ARBOCEL BWW 40 ZS
- Chemical Name
- Cellulose with citric acid
Regulatory Identifiers
- CAS Number
- not relevant Check regulations →
- EC Number
- not relevant Check regulations →
- REACH No.
- does not require registration
Identified Uses
The product is intended for professional use.
Uses advised against
not relevant
Manufacturers & Suppliers
J. RETTENMAIER & SÖHNE GMBH + CO KG
manufacturer
Holzmühle 1, D 73494, Rosenberg, Germany
+49 7967 152 0
http://www.jrs.de
Emergency Contacts
Emergency Contact
+49 7967 152 199
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. When in doubt or if symptoms are observed, get medical advice.
After contact with skin, wash immediately with plenty of water and soap. In case of skin irritation, consult a physician.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.
Symptoms: Irritating to eyes.
Rinse mouth immediately and drink plenty of water. When in doubt or if symptoms are observed, get medical advice.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray jet. Carbon dioxide. Foam. Extinguishing powder.
High power water jet.
Danger of dust explosion.
Firefighting water forms corrosive acid solutions. Do not allow run-off from fire-fighting to enter drains or water courses.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For non-emergency personnel: Avoid generation of dust. Use personal protection equipment. For emergency responders: Use personal protection equipment. Wear breathing apparatus if exposed to vapours/dusts/aerosols. Avoid generation of dust.
Do not allow to enter into surface water or drains.
Take up mechanically
Materials: appropriate containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Wear protective gloves/protective clothing/eye protection/face protection. Wash hands thoroughly after handling.
Keep container tightly closed in a cool, well-ventilated place. Protect against: Humidity.
Wash hands thoroughly after handling.
Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Have fire-extinguishers in readiness before opening containers.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn. Technical measures and the application of suitable work processes have priority over personal protection equipment.
Suitable material: CR (polychloroprene, chloroprene rubber). Thickness of the glove material: 0.5 mm. Breakthrough time (maximum wearing time): ≥ 8 h. Suitable material: NBR (nitrile rubber). Thickness of the glove material: 0.35 mm. Breakthrough time (maximum wearing time): ≥ 8 h. Suitable material: BR (butyl rubber). Thickness of the glove material: 0.5 mm. Breakthrough time (maximum wearing time): ≥ 8 h. Suitable material: FKM (fluorine rubber). Thickness of the glove material: 0.4 mm. Breakthrough time (maximum wearing time): ≥ 8 h. Suitable material: PVC (poly vinyl chloride). Thickness of the glove material: 0.5 mm. Breakthrough time (maximum wearing time): ≥ 8 h.
Eye glasses with side protection
Suitable respiratory protection apparatus: Combination filtering device (DIN EN 141). Filter class: A-P2. The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be used!
Avoid contact with skin, eyes and clothes.
Do not allow to enter into surface water or drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
not relevant
No data available
The product develops hydrogen in an aqueous solution in contact with metals.
Decomposition takes place from temperatures above: ~ 170 °C
Aluminium, Oxidising agent, Zinc. The product develops hydrogen in an aqueous solution in contact with metals.
In case of fire may be liberated: Carbon monoxide. Carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste according to applicable legislation.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- not relevant
- Shipping Name
- not relevant
- Transport Class
- not relevant
- Packing Group
- not relevant
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Observe in addition any national regulations.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ARBOCEL B xx ZS?
The signal word is no signal word.
What is the physical form of ARBOCEL B xx ZS?
ARBOCEL B xx ZS is a powder appearing as powder with white color. It has characteristic odor.
What is the solubility of ARBOCEL B xx ZS?
partially soluble (water), insoluble (fat)
What is ARBOCEL B xx ZS used for?
The product is intended for professional use.
What is the melting point of ARBOCEL B xx ZS?
The melting point is not applicable and the boiling point is not applicable.