NextSDS Logo
Safety Data Sheet EN

ortho-Phosphoric acid 85% for analysis EMSURE ACS,ISO,Reag. Ph Eur

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
ortho-Phosphoric acid 85% for analysis EMSURE ACS,ISO,Reag. Ph Eur
Product Code
100573

Regulatory Identifiers

CAS Number
N/A
REACH No.
This product is a mixture. REACH Registration Number see section 3.

Identified Uses

Reagent for analysis, Chemical production

Manufacturers & Suppliers

Merck KGaA logo

Merck KGaA

64271 Darmstadt * Germany

+49 6151 72-0

www.merck-chemicals.com

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1B H314
Met. Corr. Cat. 1 H290

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 May be corrosive to metals.
H314 Causes severe skin burns and eye damage.

Precautionary Statements

P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P309 IF exposed or if you feel unwell:
P310 Immediately call a POISON CENTER or doctor/ physician.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Chemical nature Aqueous solution

Chemical Name CAS Number Concentration Hazardous
N/A --- 50 - 100% Yes

The Safety Data Sheets for catalogue items are available at www.merck-chemicals.com

Notes

For the full text of the H-Statements mentioned in this Section, see Section 16. For the full text of the R-phrases mentioned in this Section, see Section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

fresh air. Call in physician.

Symptoms: Cough, Shortness of breath, Pain, Spasm, shock

Skin contact

wash off with plenty of water. Remove contaminated clothing. Call a physician immediately.

Symptoms: Irritation and corrosion, Pain, Spasm, shock

Eye contact

rinse out with plenty of water. Immediately call in ophthalmologist.

Symptoms: Irritation and corrosion, conjunctivitis Risk of blindness!

Ingestion

make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise.

Symptoms: Irritation and corrosion, Pain, Spasm, shock

Immediate Medical Attention

No information available.

Medical Treatment

No information available.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.

Hands

full contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: - 480 min; splash contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: - 480 min. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril L (full contact), KCL 741 Dermatril L (splash contact).

Eyes

Tightly fitting safety goggles

Respiratory

required when vapours/aerosols are generated. Recommended Filter type: Filter P 2 (acc. to DIN 3181) for solid and liquid particles of harmful substances

Skin/Body

Acid-resistant protective clothing

Environmental

Do not let product enter drains.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
colourless
Colour Intensity
---
Form
liquid
Odor
odourless
Odor Threshold
not applicable
Ph
< 0,5 at 100 g/l 20 C
Melting Point
ca. 21 C
Boiling Point
ca. 158 C at 1.013 hPa
Flash Point
does not flash
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No information available.
Vapor Pressure
2 hPa at 20 C
Vapor Density
---
Relative Density
No information available.
Bulk Density
---
Density
1,71 g/cm at 20 C
Flammability
No information available.
Upper Explosive Limit
not applicable
Lower Explosive Limit
not applicable
Explosive Limits
---
Auto Ignition Temperature
No information available.
Decomposition Temperature
No information available.
Solubility
---
Partition Coefficient
No information available.
Solubility In Water
at 20 C soluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
May be corrosive to metals.
Dynamic Viscosity
No information available.
Kinematic Viscosity
30,5 mm/s at 20 C
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN 1805
Shipping Name
PHOSPHORIC ACID, SOLUTION
Transport Class
8
Packing Group
III
ADR

yes

IMDG

yes

IATA

no

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for ortho-Phosphoric acid 85% for analysis EMSURE ACS,ISO,Reag. Ph Eur?

The signal word is danger.

What is the physical form of ortho-Phosphoric acid 85% for analysis EMSURE ACS,ISO,Reag. Ph Eur?

ortho-Phosphoric acid 85% for analysis EMSURE ACS,ISO,Reag. Ph Eur is a liquid with colourless color. It has odourless odor.

What is ortho-Phosphoric acid 85% for analysis EMSURE ACS,ISO,Reag. Ph Eur used for?

Reagent for analysis, Chemical production

What are the hazard statements for ortho-Phosphoric acid 85% for analysis EMSURE ACS,ISO,Reag. Ph Eur?

This substance has 2 hazard statements:

  • H290: May be corrosive to metals.
  • H314: Causes severe skin burns and eye damage.

What is the melting point of ortho-Phosphoric acid 85% for analysis EMSURE ACS,ISO,Reag. Ph Eur?

The melting point is ca. 21 C and the boiling point is ca. 158 C at 1.013 hPa.

Compliance Scanner

Scan your compliance