Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ortho-Phosphoric acid 85% for analysis EMSURE® ACS,ISO,Reag. Ph Eur
- Product Code
- 1.00573
- Chemical Name
- ortho-Phosphoric acid
Regulatory Identifiers
- CAS Number
- 7664-38-2 Check regulations →
- REACH No.
- This product is a mixture. REACH Registration Number see section 3.
Identified Uses
Reagent for analysis, Chemical production
Manufacturers & Suppliers
Merck Life Science BV/SRL
distributor
Brusselsesteenweg 288, B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| phosphoric acid EC: 231-633-2 | 7664-38-2 | 70 - 90% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air. Call in physician.
After skin contact: wash off with plenty of water. Remove contaminated clothing. Call a physician immediately.
After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.
After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise.
Immediate Medical Attention
Call in physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
For this substance/mixture no limitations of extinguishing agents are given.
Not combustible. Ambient fire may liberate hazardous vapours. Fire may cause evolution of: Oxides of phosphorus
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Firefighter Protection
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Take up with liquid-absorbent and neutralising material (e.g. Chemizorb® H+, Merck Art. No. 101595). Dispose of properly. Clean up affected area.
Materials: liquid-absorbent and neutralising material (e.g. Chemizorb® H+, Merck Art. No. 101595)
Related Products
Similar products with comparable safety profiles
ortho-Phosphoric acid 85% for analysis EMSURE® ACS,ISO,Reag. Ph Eur
UFI: HXT5-G6KY-K991-MY73
ortho-Phosphoric acid 85% for analysis EMSURE® ACS,ISO,Reag. Ph Eur
---
ortho-Phosphoric acid 85% for analysis EMSURE® ACS, ISO, Reag. Ph Eur
---
Hydrofluoric acid 48% for analysis EMSURE® ACS,ISO,Reag. Ph Eur
---
tri-Sodium phosphate dodecahydrate for analysis EMSURE® ACS,Reag. Ph Eur
CAS: 10101-89-0
Nitric acid 69% for analysis EMSURE® ACS,Reag. Ph Eur
CAS: 7697-37-2
Nitric acid 69% for analysis EMSURE® ACS, Reag. Ph Eur
CAS: 7697-37-2
Boric acid for analysis EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 10043-35-3
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe label precautions.
Tightly closed. Recommended storage temperature see product label.
Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Full contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril® L. Splash contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril® L. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Tightly fitting safety goggles
required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P2. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No data available
No data available
Risk of ignition or formation of inflammable gases or vapours with: Metals, metal alloys. Possible formation of: Hydrogen. Violent reactions possible with: Bases, metallic oxides
No data available
Aluminum, iron/iron-containing compounds, Mild steel. Gives off hydrogen by reaction with metals.
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1805
- Shipping Name
- PHOSPHORIC ACID SOLUTION
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ortho-Phosphoric acid 85% for analysis EMSURE® ACS,ISO,Reag. Ph Eur?
The signal word is danger.
What is the physical form of ortho-Phosphoric acid 85% for analysis EMSURE® ACS,ISO,Reag. Ph Eur?
ortho-Phosphoric acid 85% for analysis EMSURE® ACS,ISO,Reag. Ph Eur is a liquid with colorless color. It has odorless odor.
What is ortho-Phosphoric acid 85% for analysis EMSURE® ACS,ISO,Reag. Ph Eur used for?
Reagent for analysis, Chemical production
What are the hazard statements for ortho-Phosphoric acid 85% for analysis EMSURE® ACS,ISO,Reag. Ph Eur?
This substance has 3 hazard statements:
- H290: May be corrosive to metals.
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
What is the melting point of ortho-Phosphoric acid 85% for analysis EMSURE® ACS,ISO,Reag. Ph Eur?
The melting point is ca.21 °C and the boiling point is ca.158 °C at 1.013 hPa.