Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sanosil S010
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Disinfectant
Manufacturers & Suppliers
Sanosil Service GmbH
manufacturer
Marktoberdorfer Straße 44 b 86956 Schongau
08861 – 910 98 00
http://www.sanosil-service.de
Emergency Contacts
National Poisons Information Service (NPIS)
(+44) 844 892 0111
National Poisons Information Service (NPIS)
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of the substances listed below with harmless additions (aqueous solution).
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| hydrogenperoxide solution EC: 231-765-0 | 7722-84-1 | 5 - 8% | Yes |
| Silver | 7440-22-4 | 0.1% | No |
Biocidal active substances: 7.84 g hydrogen peroxide per 100 g product. Silver (CAS 7440-22-4) < 0,1%
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of symptoms.
Instantly wash with water and soap and rinse thoroughly. If skin irritation persists, seek medical advice. Wash contaminated clothing with water.
Rinse immediately opened eye for several minutes under running water. Then consult doctor.
Rinse out mouth and then drink plenty of water. Do not induce vomiting. Drink plenty of water. Call for medical help.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Product is non-flammable. Use fire fighting measure that suit the surroundings.
Product is non-flammable. Danger of decomposition with release of oxygen (oxidizing). Heat will increase pressure and may lead to the container exploding.
Endangered containers in the surrounding area should be cooled with a water-hose.
Firefighter Protection
Wear full protective suit with self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment and keep unprotected persons away.
If large amounts are released, the authorities must be informed.
Do not allow to enter drainage system, surface or ground water.
Absorb with inert absorbent material (sand, diatomite, acid binders, universal binders).
Materials: sand, diatomite, acid binders, universal binders
Related Products
Similar products with comparable safety profiles
Sanosil S010
---
Sanosil S015
---
Sanosil S003
UFI: C4TK-QV5T-T202-7NX7
Britesil C20, Britesil C24, Britesil HS240, Britesil C20-P, Britesil C24-P, Britesil H24, Britesil H20, 3Na SAT SODIUM SILICATE 3Na
---
Sokalan® CP 13 S
---
MultiSil® ChloroSil 1.000 F
---
Solvesso™ 100
---
TENSOPOL S30LSK
UFI: RQD0-G0J9-7005-KFS9
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep containers tightly sealed. Avoid contact with eyes and skin. Do not replace residual quantities in storage containers.
Store in cool, dry conditions in well sealed containers. Protect from heat and direct sunlight.
Stoff ist nicht brennbar, kann jedoch bei Hitzeeinwirkung und Durchfeuchtung auf brennbare Substanzen entzündend wirken durch Freisetzung von Sauerstoff. Ätzende Zersetzungsgase.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used and stored according to specifications.
No further relevant information available.
No dangerous reactions known
Protect from heat and direct sunlight.
Impurities: metal ions, metal salts, metals, alkalis, hydrochloric acid, reducing agent, combustible materials, solvent.
Oxygen (may cause fire).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sanosil S010?
The signal word is warning.
What is the physical form of Sanosil S010?
Sanosil S010 is a liquid with colourless color. It has characteristic odor.
What is Sanosil S010 used for?
Disinfectant
What are the hazard statements for Sanosil S010?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of Sanosil S010?
The melting point is Not determined and the boiling point is >80 °C.