Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium Acid Pyrophosphate
- Product Code
- M284
- Chemical Name
- Sodium Acid Pyrophosphate
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
A.B GIDA SAN. VE TİC.A.Ş.
manufacturer
Çilehane cad. Çamlıca Evleri Sitesi, No.13/3, Küçükçamlıca – Üsküdar 34696 – Istanbul, Turkey
+90216 545 20 10
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium Acid Pyrophosphate | 7758-16-9 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. See a doctor if effects occur.
Immediately wash with soap and water. Rinse thoroughly. Seek medical attention if effects occur. Launder contaminated shoes and clothing before reuse.
Immediately flush eyes with water for 30 minutes while holding eyelids open. Seek medical attention.
If swallowed, give 2 glasses of milk (preferred) or water and consult physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use alcohol foam, carbon dioxide, dry chemical or water spray when fighting fires involving this material.
This material is not combustible.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, (MSHA/NIOSH approved or equivalent) and full protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Scoop into appropriate containers. Flush residual with plenty of water.
Scoop into appropriate containers. Flush residual with plenty of water.
Related Products
Similar products with comparable safety profiles
Sodium pyrophosphate
CAS: 7722-88-5
Sodium pyrophosphate
CAS: 7722-88-5
Sodium pyrophosphate
CAS: 7722-88-5
Sodium pyrophosphate decahydrate
---
Potassium pyrophosphate
CAS: 7320-34-5
Sodium Tripolyphosphate
CAS: Mixture
Sodium tripolyphosphate
CAS: 7758-29-4
Sodium hexametaphosphate
CAS: 10124-56-8
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Refer to section 8.
Store at moderate temperatures in dry, well ventilated area. Keep in original container. Avoid wetting.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ventilation – General and local ventilation are required.
chemical resistant gloves.
Chemical goggles required and an eye washer in work area.
None normally needed. For protection from dust, use NIOSH approved respirator with dust protection.
Clean body covering
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Yes
No
Oxidizing materials
no specific hazardous decomposition products noted. Loses water above 250°C to form sodium metaphosphate
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No information available regarding fish toxicity.
12.2 Persistence and degradability
The substance is reported as not biodegradable.
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with ALL applicable state and local regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Sodium Acid Pyrophosphate
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This product or its components, if a mixture, is subject to following regulations
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sodium Acid Pyrophosphate?
The signal word is no signal word.
What is the physical form of Sodium Acid Pyrophosphate?
Sodium Acid Pyrophosphate is a powder, dust. with white color. It has odorless or no characteristic odor odor.
What is the solubility of Sodium Acid Pyrophosphate?
Insoluble in Water: 0,1% max
What is the melting point of Sodium Acid Pyrophosphate?
The melting point is 900°C .