Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Incidin OxyFoam S
- Product Code
- 116307E
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Surface disinfectant. Manual process
Uses advised against
Reserved for industrial and professional use.
Manufacturers & Suppliers
Ecolab Ltd.
manufacturer
PO Box 11; Winnington Avenue, Northwich, Cheshire, United Kingdom CW8 4DX
Emergency Contacts
Food & Beverage, Institutional, Agriculture, Textile Hygiene: Northwich
+44 (0)1606 74488
Healthcare Leeds
+44 (0)113 232 2480
Healthcare Swansea
+44 (0)1235 239670
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Get medical attention if symptoms occur.
Rinse with plenty of water.
Rinse with plenty of water.
Rinse mouth. Get medical attention if symptoms occur.
Medical Treatment
No specific measures identified.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
None known.
Not flammable or combustible.
Firefighter Protection
Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop leak if safe to do so. Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). Flush away traces with water. For large spills, dike spilled material or otherwise contain material to ensure runoff does not reach a waterway.
For large spills, dike spilled material or otherwise contain material to ensure runoff does not reach a waterway.
No special environmental precautions required.
collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). Flush away traces with water.
Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not mix with bleach or other chlorinated products – will cause chlorine gas.
Keep out of reach of children. Keep container tightly closed. Store in suitable labeled containers.
Wash hands before breaks and immediately after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Good general ventilation should be sufficient to control worker exposure to airborne contaminants.
No special protective equipment required.
No special protective equipment required.
None required if airborne concentrations are maintained below the exposure limit listed in Exposure Limit Information. Use certified respiratory protection equipment meeting EU requirements(89/656/EEC, 89/686/EEC), or equivalent, when respiratory risks cannot be avoided or sufficiently limited by technical means of collective protection or by measures, methods or procedures of work organization.
No special protective equipment required.
Consider the provision of containment around storage vessels.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
Do not mix with bleach or other chlorinated products – will cause chlorine gas.
None known.
None known.
Decomposition products may include the following materials: Carbon oxides, nitrogen oxides (NOx), Sulphur oxides, Oxides of phosphorus
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Diluted product can be flushed to sanitary sewer.
Dispose of in accordance with the European Directives on waste and hazardous waste.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not dangerous goods
- Shipping Name
- Not dangerous goods
- Transport Class
- Not dangerous goods
- Packing Group
- Not dangerous goods
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Contains: Disinfectants. Detergents composition: < 5% Oxygen-based bleaching agents, < 5% Anionic surfactants.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Incidin OxyFoam S?
The signal word is no signal word.
What is the physical form of Incidin OxyFoam S?
Incidin OxyFoam S is a liquid appearing as liquid with clear, colourless color. It has characteristic odor.
What is the solubility of Incidin OxyFoam S?
Not applicable and/or not determined for the mixture
What is Incidin OxyFoam S used for?
Surface disinfectant. Manual process
What is the melting point of Incidin OxyFoam S?
The melting point is Not applicable and/or not determined for the mixture and the boiling point is 100 °C.