Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Acrylamide/Bis Solution 37,5:1
- Product Code
- 10688
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
SERVA Electrophoresis GmbH
manufacturer
Carl-Benz-Str. 7, D-69115 Heidelberg
+49 6221 13840-0
Emergency Contacts
Poison Information Center Mainz
+49 (0) 6131 19240
DE, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness place patient stably in side position for transportation. Supply fresh air and to be sure call for a doctor.
Immediate wash with copious amounts of water and soap; rinse thoroughly; seek medical advice.
Rinse opened eye for several minutes under running water. Remove present contact lenses, if easy to do, and continue rinsing. Consult ophthalmologist immediately.
Wash out mouth instantly. Drink copious amounts of water and provide fresh air. Call for doctor immediately. Do not induce vomiting!
Immediate Medical Attention
Call for doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO₂, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
No further relevant information available.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Acrylamide (40%) Solutions
---
Acrylamide
CAS: 79-06-1
N,N'-Methylenebisacrylamide, 2% solution
---
N-(Hydroxymethyl)acrylamide solution
---
N,N'-(1,2-Dihydroxyethylene)bis-acrylamide
---
N-(Hydroxymethyl)acrylamide
---
Acrylonitrile (stabilized with MEHQ)
---
Acrylonitrile
CAS: 107-13-1
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Open and handle receptacle with care. Prevent formation of aerosols.
Store at +2 to +8 °C. Store only in unopened original receptacles. Store under lock and key and with access restricted to technical experts or their assistants only. Keep receptacle tightly sealed and store in dry conditions.
The product is not flammable.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Neoprene gloves, PVC gloves, Protective gloves. PVC (0.5 mm) Butyl (0.5 mm) max. 8 h. For the permanent contact of a maximum of 15 minutes gloves made of the following materials are suitable: PVC gloves, Neoprene gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles.
Short term filter device: Filter A/P3
Protective work clothing.
PNEC (Acrylamide, CAS No. 79-06-1) fresh water for permanent discharge: 0,03 mg/l; PNEC (Acrylamide, CAS No. 79-06-1) fresh water for occasional discharge: 0,3 mg/l; PNEC (Acrylamide, CAS No. 79-06-1) sewage treatment plant: 0,2 mg/l
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No further relevant informations available.
No further relevant information available.
No further relevant information available.
No further relevant informations available. In case of fire: See Section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal must be made according to official regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3426
- Shipping Name
- 3426 ACRYLAMIDE SOLUTION
- Transport Class
- 6.1 Toxic substances.
- Packing Group
- III
Warning: Toxic substances.
Warning: Toxic substances.
Warning: Toxic substances.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Acrylamide/Bis Solution 37,5:1?
The signal word is danger.
What is the physical form of Acrylamide/Bis Solution 37,5:1?
Acrylamide/Bis Solution 37,5:1 is a solution appearing as solution with colourless color. It has characteristic odor.
What is the solubility of Acrylamide/Bis Solution 37,5:1?
Fully miscible in Water
What is Acrylamide/Bis Solution 37,5:1 used for?
Laboratory chemicals
What are the hazard statements for Acrylamide/Bis Solution 37,5:1?
This substance has 8 hazard statements:
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H340: May cause genetic defects.
- H350: May cause cancer.
- H361f: Suspected of damaging fertility.
- H372: Causes damage to organs through prolonged or repeated exposure.
What is the melting point of Acrylamide/Bis Solution 37,5:1?
The melting point is undetermined and the boiling point is undetermined.