Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 30% Acrylamide/Bis Solution, 29:1
- Product Code
- 1610156, 1610157, 9702419, 1610156EDU, 1610157EDU
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Bio-Rad Laboratories, Life Science Group
manufacturer
2000 Alfred Nobel Drive, Hercules, California 94547
(510)741-1000
Emergency Contacts
Emergency Contact
1(800)424-9300
Emergency Contact
510-741-1000
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of the substances listed below with non-hazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| acrylamide | 79-06-1 | 20 - 35% | No |
| N,N'-methylenediacrylamide | 110-26-9 | 0.1 - 1% | No |
| water | 7732-18-5 | 50 - 100% | No |
For the wording of the listed risk phrases refer to section 15.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Rinse opened eye for several minutes under running water.
Induce vomiting and call for medical help.
Immediate Medical Attention
No further relevant information available.
Medical Treatment
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
No further relevant information available.
Firefighter Protection
Protective equipment: No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective clothing.
Dilute with plenty of water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special precautions are necessary if used correctly.
According to product specification
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Only use chemical-protective gloves with CE-labeling of category III. Protective gloves. Material of gloves: Synthetic gloves. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No dangerous reactions known
No decomposition if used according to specifications.
No further relevant information available.
Carbon monoxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3426
- Shipping Name
- ACRYLAMIDE SOLUTION
- Transport Class
- 6.1 Toxic substances
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 30% Acrylamide/Bis Solution, 29:1?
The signal word is danger.
What is the physical form of 30% Acrylamide/Bis Solution, 29:1?
30% Acrylamide/Bis Solution, 29:1 is a liquid with colorless color. It has odorless odor.
What is 30% Acrylamide/Bis Solution, 29:1 used for?
Laboratory chemicals
What are the hazard statements for 30% Acrylamide/Bis Solution, 29:1?
This substance has 8 hazard statements:
- H302 + H312: Harmful if swallowed or in contact with skin.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H340: May cause genetic defects.
- H350: May cause cancer.
- H361: Suspected of damaging fertility or the unborn child.
- H372: Causes damage to organs through prolonged or repeated exposure.
What is the melting point of 30% Acrylamide/Bis Solution, 29:1?
The melting point is undetermined and the boiling point is undetermined.