Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- NANOCOLOR Ammonium 100
- Product Code
- 985008
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Product for analytical use. Exposure Scenario Classification according REACh, RIP 3.2 Codes: SU 0-2, PC 21, PROC 15, AC 0 The exposure scenario is integrated into sections 1-16.
Uses advised against
not described
Manufacturers & Suppliers
MACHEREY-NAGEL GmbH & Co. KG
manufacturer
Neumann-Neander-Str. 6-8, 52355 Dueren, GERMANY
+49 2421 969 0
http://www.mn-net.com/SDS
Emergency Contacts
Gemeinsames Giftinformationszentrum (GGIZ)
+49 361 730 730
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
When not listed, mixtures are added with water [CAS No. 7732-18-5] to 100%.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| sodium nitroprusside EC: 238-373-9 | 14402-89-2 | 15 - 33% | Yes |
| dichloroisocyanuric acid, Na salt EC: 220-767-7 | 2893-78-9 | 10 - 20% | Yes |
| N/A | --- | 0.1 - 0.5% | Yes |
| tri-sodium citrate EC: 200-675-3 | 6132-04-3 | 1% | No |
| water EC: 231-791-2 | 7732-18-5 | 90 - 100% | No |
Notes
When not listed, mixtures are added with water [CAS No. 7732-18-5] to 100%.
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation of foam or vapour fresh air should be inhaled. Keep airways free.
Remove contaminated clothing. Rinse the affected skin or mucous membrane thoroughly under running water. (If possible) use soap.
After contact with the eyes rinse thoroughly under running water with the eyelid wide open with eye washing bottle, eye douche or running water (protect intact eye).
After oral intake lots of water should be drunk after it has been ingested.
Immediate Medical Attention
No additionally recommendations.
Medical Treatment
No additionally recommendations.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
FOAM, WATER SPRAY, DRY POWDER, CARBON DIOXIDE
Formation of hazardous and caustic vapour-air mixtures possible.
No, for listed product. Product package burns like paper or plastic.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not breathe vapours. Regular staff training is necessary.
Collect small amounts of leaked liquid and flush with water into drains.
not necessary
Bind any escaping liquid with inert absorbent. Collect small amounts of leaked liquid and flush with water into drains.
Materials: inert absorbent
Related Products
Similar products with comparable safety profiles
Ammonium thiocyanate AnalaR NORMAPUR® Reag. Ph. Eur. analytical reagent
CAS: 1762-95-4
AMMONIUM NITRATE LIQUID
---
Ammonium acetate AnalaR NORMAPUR® Reag. Ph.Eur., ACS
CAS: 631-61-8
Ammonium iron (II) sulphate hexahydrate AnalaR NORMAPUR®
CAS: 7783-85-9
Hexamethylenediamine 100%
CAS: 124-09-4
ETHYLENEAMINE E 100
CAS: 68131-73-7
ETHYLENEAMINE E 100
CAS: 68131-73-7
Ammonium Hydroxide, ACS
CAS: 1336-21-6
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handling in accordance with the test instruction, that comes with the product. Use a safety bottle when shaking test tubes.
The original product package of MACHEREY-NAGEL allows a safe storage. Keep original product packages tightly closed during handling and storage.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Good ventilation and extraction system in the room, floor resistant to chemicals with floor drainage and washing facilities.
Yes, gloves according EN 374 (permeation time >30 min - level 2), consist of PVC, natural latex, Neopren, or Nitril (f.ex. from Ansell or KCL). Use for short times chemical resistant latex gloves with code EN 374-3 level 1.
Yes, safety glasses according EN 166 with integrated side shields or wrap-around protection.
No additional recommendations.
Not necessary.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No known instability.
no further data available.
No further data available.
Observe labeled storage temperature.
Avoid contact with strong acids or alkalines.
In the original package all parts/all reagents are safety and separated stored. Decompositions are not observed during the expiration period under recommended conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Please observe local regulations for collection and disposal of hazardous waste and contact waste disposal company, where you will obtain information on laboratory waste disposal.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for NANOCOLOR Ammonium 100?
The signal word is warning.
What is the physical form of NANOCOLOR Ammonium 100?
NANOCOLOR Ammonium 100 is a powder (solid), liquid appearing as powder (solid), liquid with rose, colourless color. It has chloric, odorless odor.
What is NANOCOLOR Ammonium 100 used for?
Product for analytical use. Exposure Scenario Classification according REACh, RIP 3.2 Codes: SU 0-2, PC 21, PROC 15, AC 0 The exposure scenario is integrated into sections 1-16.