NextSDS Logo
Safety Data Sheet EN

NANOCOLOR Chloride 200, Robot

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
NANOCOLOR Chloride 200, Robot
Product Code
985619

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Product for analytical use. Exposure Scenario Classification according REACH, RIP 3.2 Codes: SU 0-2, PC 21, PROC 15, AC 0 The exposure scenario is integrated into sections 1-16.

Uses advised against

not described

Manufacturers & Suppliers

M

MACHEREY-NAGEL GmbH & Co. KG

manufacturer

Neumann-Neander-Str. 6-8, 52355 Dueren, GERMANY

+49 2421 969 0

Emergency Contacts

Gemeinsames Giftinformationszentrum (GGIZ)

+49 361 730 730

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Met. Corr. Cat. 1 H290
Acute Tox. Cat. 3 H301
Acute Tox. Cat. 4 H302
Acute Tox. Cat. 3 H311
Acute Tox. Cat. 4 H312
Skin Corr. Cat. 1B H314
Acute Tox. Cat. 3 H331
Acute Tox. Cat. 4 H332
STOT SE Cat. 1 H370
STOT RE Cat. 2 H373
Aquatic Chronic Cat. 4 H413

GHS Pictograms

GHS02 - Flammable

GHS02

GHS05 - Corrosive

GHS05

GHS06 - Acute toxicity

GHS06

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H301 Toxic if swallowed.
H311 Toxic in contact with skin.
H314 Causes severe skin burns and eye damage.
H331 Toxic if inhaled.
H370 Causes damage to organs.

Precautionary Statements

P260 Do not breathe dust/vapours.
P280 Wear protective gloves/eye protection.
P310 Immediately call a POISON CENTER/doctor.
P405 Store locked up.
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
IF ON SKIN: Wash with plenty of water.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

When not listed, mixtures are added with water [CAS No. 7732-18-5] to 100%.

Chemical Name CAS Number Concentration Hazardous
nitric acid EC: 231-714-2 7697-37-2 5 - 13% Yes
inorganic salts, declaration not necessary --- 1% No
mercury(II) thiocyanate EC: 209-773-0 --- 0.32 - 0.64% Yes
methanol EC: 200-659-6 --- 95 - 100% Yes

List of H and P phrases: see section 16.1

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

After inhalation of foam or vapour fresh air should be inhaled. Keep airways free. If vomiting and if insensible place patient in recovery position and keep airways free. Administer a Dexamethasone spray as soon as possible. Ensure quiet, warmth, and provide resuscitation if necessary. In the event of respiratory distress ensure that the patient inhales oxygen. Secure the breathing, heart and circulatory function.

Symptoms: respiratory distress

Skin contact

Remove contaminated clothing immediately. Rinse the affected skin or mucous membrane thoroughly for min. 15 minutes under running water. (If possible) use soap. Avoid neutralisation. Then apply a loose bandage.

Eye contact

After contact with the eyes rinse thoroughly under running water with the eyelid wide open for min. 10 minutes with eye washing bottle, eye douche or running water (protect intact eye). Before (if possible) apply eye drops Proxymetacaine 0.5%, if the opening the eyelid convulsion is painful. Further treatment to be carried out by an eye specialist.

Symptoms: convulsion is painful

Ingestion

After oral intake lots of water with activated charcoal supplement should be drunk after it has been ingested. Do not induce vomiting under any circumstances. Do not make any efforts to neutralise it. Contact medical advice for possible consequences.

Immediate Medical Attention

Take to a doctor, in a raised position if there are breathing difficulties. Further treatment to be carried out by an eye specialist. Contact medical advice for possible consequences.

Medical Treatment

Administer a Dexamethasone spray as soon as possible. In the event of respiratory distress ensure that the patient inhales oxygen. Secure the breathing, heart and circulatory function. Before (if possible) apply eye drops Proxymetacaine 0.5%, if the opening the eyelid convulsion is painful.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

FOAM, WATER SPRAY, DRY POWDER, CARBON DIOXIDE

Specific hazards

Highly flammable (GHS regulation). Forms explosive vapour-air mixtures. Formation of hazardous and caustic vapour-air mixtures possible.

Instructions

Spray any vapours released with water.

Firefighter Protection

Use only acid-resistant safety equipment. For great amount - if necessary - protective breathing apparatus which is independent of the ambient air (isolated equipment), and sealed protective clothing is necessary in the event of a large-scale formation of toxic substances.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Regular staff training is necessary, indicating hazards and precautions on the basis of operating instructions. Restrictions on activity must be observed.

Small spill

Collect small amounts of leaked liquid and flush with water into drains.

Environmental

not necessary

Cleanup methods

Clean any contaminated equipment and floors with plenty of water.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handling in accordance with the test instruction, that comes with the product. Use only in well-ventilated working areas. Use a safety bottle when shaking test tubes.

Storage

Keep original product packages tightly closed during handling and storage, and store in a well-ventilated place at max. 25 °C, away or preferably separate from substances with which a hazardous reaction could take place, so that they are not immediately accessible to outside parties.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Good ventilation and extraction system in the room, floor resistant to chemicals with floor drainage and washing facilities.

Hands

Yes, gloves according EN 374 (permeation time >30 min - level 2), consist of PVC, natural latex, Neopren, or Nitril (f.ex. from Ansell or KCL). Use for short times chemical resistant latex gloves with code EN 374-3 level 1.

Eyes

Yes, safety glasses according EN 166 with integrated side shields or wrap-around protection or face protection.

Respiratory

Use for open access of these substances for example a protection filter, class A/AX. No additional recommendations.

Skin/Body

Recommended to avoid clothing damage, and to avoid contamination with these hazards.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Metal Corrosion
---
Partition Coefficient
---
Evaporation Rate
---
Vapor Density
---
Explosive Limits
---
Odor
nitric, alcoholic
Lower Explosive Limit
---
Bulk Density
---
Upper Explosive Limit
---
Crystallisation Point
---
Kinematic Viscosity
---
Solubility In Water
---
Flash Point
---
Auto Ignition Temperature
---
Properties Status
---
Softening Point
---
Colour
slightly yellow, colourless
Ph
---
Odor Threshold
---
Cloud Point
---
Dynamic Viscosity
---
Solidification Point
---
Melting Point
---
Relative Evaporation Rate
---
Decomposition Temperature
---
Flammability
Substances are very volatile and form flammable vapour-air mixtures.
Solubility In Fat
---
Appearance
liquid
Relative Density
---
Density
---
Molecular Weight
---
Physical State Data
liquid
Voc Content
---
State Under Standard Conditions
---
Vapor Pressure
---
Solubility
---
Boiling Point
---
Freezing Point
---
Form
---
Colour Intensity
---
Physical State
liquid
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No known instability.

Reactivity

Strong CORROSIVE, no further data available.

Hazardous reactions

Can react violently with organic material. Possible: Contact with acids liberates toxic gas.

Avoid

Not necessary. Observe labeled storage temperature.

Incompatible

Avoid contact with strong acids or alkalines.

Decomposition

Decompositions are not observed during the expiration period under recommended conditions.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3316
Shipping Name
Chemical Kit
Transport Class
9
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for NANOCOLOR Chloride 200, Robot?

The signal word is danger.

What is the physical form of NANOCOLOR Chloride 200, Robot?

NANOCOLOR Chloride 200, Robot is a liquid appearing as liquid with slightly yellow, colourless color. It has nitric, alcoholic odor.

What is NANOCOLOR Chloride 200, Robot used for?

Product for analytical use. Exposure Scenario Classification according REACH, RIP 3.2 Codes: SU 0-2, PC 21, PROC 15, AC 0 The exposure scenario is integrated into sections 1-16.

What are the hazard statements for NANOCOLOR Chloride 200, Robot?

This substance has 5 hazard statements:

  • H301: Toxic if swallowed.
  • H311: Toxic in contact with skin.
  • H314: Causes severe skin burns and eye damage.
  • H331: Toxic if inhaled.
  • H370: Causes damage to organs.