NextSDS Logo
Safety Data Sheet EN

S1220 ALUPES /PU

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
S1220 ALUPES /PU
Product Code
Hiltex/Silica/006

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

H

Hiltex Technische Weefsels B.V.

manufacturer

Handelsweg 37 1525 RG West Knollendam The Netherlands

31-(0)75-6871090

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Silica fibre 6 or 9 micron Pure (amorphous) silica fibre With organic sizing for textile materials or composits SiO2>95% Sizing less than 2% Laminated with a aluminized polyester foil and PU coating on the back

Chemical Name CAS Number Concentration Hazardous
Silica fibre 6 or 9 micron Pure (amorphous) silica fibre --- 95% No
With organic sizing for textile materials or composits --- 2% No
aluminized polyester foil --- --- No
PU coating on the back --- --- No

Silica 006 Alupes-PU HILTE Technical Textiles

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Take care of good ventilation.

Skin contact

Wash copiously with soap and lukewarm water.

Eye contact

Flush well with running water for 10 minutes.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water or powder.

Specific hazards

Only the packaging burns (cardboard, polyethylene, PVC and polysterine).

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Respect local disposal regulations (dump corresponding to product classified as “non hazardous”)

Cleanup methods

Sweep and shovel in containers designed for silica or glass fibers waste.

—

Related Products

Similar products with comparable safety profiles

S

S1220 ALUPES /PU

---

A

ALCUPOL F5612

CAS: 25791-96-2

A

ALCUPOL® P-2321, ALCUPOL® P-2621, ALCUPOL® P-2921, ALCUPOL® P-3021, ALCUPOL® P-3041, ALCUPOL® P-3041N, ALCUPOL® P-3091, ALCUPOL® P-3091S, ALCUPOL® P-3421, ALCUPOL® P-3621, ALCUPOL® P-3621S

---

U

UFAPOL SLS 30

UFI: 1GPF-C06X-D00X-1EHM

A

Ascusol PU 92

---

M

MAPEFLEX P2 SL / A

---

M

MAPEFLEX P2 SL / A

---

P

PATEX 435/SL

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Store in dry area.

Storage

Store in dry area.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Avoid generating dust by breaking the fibers Use exhaust fan to minimise irritation effect.

Hands

Recommended to wear gloves

Eyes

Wear protective glasses

Respiratory

Wear paper mask

Skin/Body

Wear long sleeves to avoid irritation

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Density
---
Flammability
---
Decomposition Temperature
Only the sizing is decomposed at a starting temperature of 100°C.
Explosive Limits
---
Partition Coefficient
---
Solidification Point
---
Freezing Point
---
Relative Evaporation Rate
---
Flash Point
≥ 177°C (sizing only)
Colour
With one side grey PU coating and one side aluminium-polyester foil
Bulk Density
---
Boiling Point
---
Physical State
Solid
Solubility
Partial solubility of sizing in water.
Lower Explosive Limit
---
Voc Content
---
Crystallisation Point
---
Cloud Point
---
Upper Explosive Limit
---
Colour Intensity
---
Metal Corrosion
---
Molecular Weight
---
Odor
---
Properties Status
---
Density
Density of the Silica : 2,2/cm3
Solubility In Water
---
Appearance
---
Softening Point
---
Solubility In Fat
---
Kinematic Viscosity
---
Odor Threshold
---
Auto Ignition Temperature
---
Vapor Pressure
---
Physical State Data
solid
Melting Point
Foil will let loose at about 180°C Sublimation fabric above 1600°C
State Under Standard Conditions
---
Form
Continuous silica filaments, nominal diameter 9 micron.
Ph
---
Evaporation Rate
---
Dynamic Viscosity
---
Vapor Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable in storage conditions mentioned in chapter 7. Stable product, doesn’t lead to any dangerous reaction.

Decomposition

When the combustion is kept going, small quantities of CO, CO2 may result from the decomposition of the size.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for S1220 ALUPES /PU?

The signal word is no signal word.

What is the physical form of S1220 ALUPES /PU?

S1220 ALUPES /PU is a solid with with one side grey pu coating and one side aluminium-polyester foil color.

What is the solubility of S1220 ALUPES /PU?

Partial solubility of sizing in water.

What is the melting point of S1220 ALUPES /PU?

The melting point is Foil will let loose at about 180°C Sublimation fabric above 1600°C .