NextSDS Logo
Safety Data Sheet EN

S1220 ALUPES /PU

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
S1220 ALUPES /PU
Product Code
Hiltex/Silica/006

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

H

Hiltex Technische Weefsels B.V.

manufacturer

Handelsweg 37, 1525 RG West Knollendam, The Netherlands

31-(0)75-6871090

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Silica fibre 6 or 9 micron. Pure (amorphous) silica fibre. With organic sizing for textile materials or composits. SiO2>95%. Sizing less than 2%. Laminated with a aluminized polyester foil and PU coating on the back.

Chemical Name CAS Number Concentration Hazardous
Silica fibre --- --- No
Organic sizing --- 2% No
Aluminized polyester foil --- --- No
PU coating --- --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Take care of good ventilation.

Skin contact

Wash copiously with soap and lukewarm water.

Eye contact

Flush well with running water for 10 minutes.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water or powder. Only the packaging burns (cardboard, polyethylene, PVC and polysterine).

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Respect local disposal regulations (dump corresponding to product classified as “non hazardous”)

Cleanup methods

Sweep and shovel in containers designed for silica or glass fibers waste.

Materials: containers designed for silica or glass fibers waste

—

Related Products

Similar products with comparable safety profiles

A

ALCUPOL F5612

CAS: 25791-96-2

A

ALCUPOL® P-2321, ALCUPOL® P-2621, ALCUPOL® P-2921, ALCUPOL® P-3021, ALCUPOL® P-3041, ALCUPOL® P-3041N, ALCUPOL® P-3091, ALCUPOL® P-3091S, ALCUPOL® P-3421, ALCUPOL® P-3621, ALCUPOL® P-3621S

---

U

UFAPOL SLS 30

UFI: 1GPF-C06X-D00X-1EHM

A

Ascusol PU 92

---

M

MAPEFLEX P2 SL / A

---

M

MAPEFLEX P2 SL / A

---

P

PATEX 435/SL

---

P

PLASITE 4301 HT PART A

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Store in dry area.

Storage

Store in dry area.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Avoid generating dust by breaking the fibers. Use exhaust fan to minimise irritation effect.

Hands

Recommended to wear gloves

Eyes

Wear protective glasses

Respiratory

Wear paper mask

Skin/Body

Wear long sleeves to avoid irritation

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
---
Colour
With one side grey PU coating and one side aluminium-polyester foil
Colour Intensity
---
Form
Continuous silica filaments, nominal diameter 9 micron.
Odor
---
Odor Threshold
---
Ph
---
Melting Point
---
Boiling Point
---
Flash Point
≥ 177°C (sizing only)
Freezing Point
---
Softening Point
Foil will let loose at about 180C
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
2,2/cm3
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
Only the sizing is decomposed at a starting temperature of 100°C.
Solubility
Partial solubility of sizing in water.
Partition Coefficient
---
Solubility In Water
Partial solubility of sizing in water.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable in storage conditions mentioned in chapter 7. Stable product, doesn’t lead to any dangerous reaction.

Decomposition

When the combustion is kept going, small quantities of CO, CO2 may result from the decomposition of the size.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The REACH Regulation (Directive No. 1907/2006) does not apply to silica fiber products, or to finishing and coatings, as they have no reactivity up to 55 °C and are not considered chemical substances with harmful/reactivating capacity.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for S1220 ALUPES /PU?

The signal word is no signal word.

What is the physical form of S1220 ALUPES /PU?

S1220 ALUPES /PU is a solid with with one side grey pu coating and one side aluminium-polyester foil color.

What is the solubility of S1220 ALUPES /PU?

Partial solubility of sizing in water.