NextSDS Logo
Safety Data Sheet EN

Eurol Antifreeze G11

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Eurol Antifreeze G11
Product Form
Mixture
Product Code
E503154

Regulatory Identifiers

CAS Number
N/A
UFI Code
HDYX-Y24E-EA0N-XWDF

Identified Uses

Anti-freezing agents

Uses advised against

No additional information available

Manufacturers & Suppliers

Eurol B.V. logo

Eurol B.V.

Energiestraat 12 NL−7442 DA Nijverdal The Netherlands

+31 548 615 165

http://www.eurol.com

Emergency Contacts

National Poisons Information Centre Beaumont Hospital

+353 1 809 2566

National Poisons Information Centre Beaumont Hospital

+353 1 809 2166

Medicines & Poisons Info Office

+356 2545 6508

National Poisons Information Service (Birmingham Centre) City Hospital

0344 892 0111

NHS 111/NHS 24/NHS Direct

111

NHS 111/NHS 24/NHS Direct

0845 4647

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302
STOT RE Cat. 2 H373

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H302 Harmful if swallowed.
H373 May cause damage to organs (kidneys) through prolonged or repeated exposure (oral).

Precautionary Statements

P102 Keep out of reach of children.
P260 Do not breathe mist, spray, vapours.
P264 Wash hands, forearms and face thoroughly after handling.
P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
P314 Get medical advice/attention if you feel unwell.
P501 Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
ethanediol; ethylene glycol EC: 203-473-3 107-21-1 50% Yes
sodium benzoate EC: 208-534-8 532-32-1 3 - 5% Yes
Dipotassium tetraborate EC: 215-575-5 1332-77-0 1 - 3% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing.

Symptoms: At normal ambient temperatures this product will be unlikely to present an inhalation hazard because of its low volatility. May be harmful by inhalation if exposure to vapour, mists or fumes resulting from thermal decomposition products occurs.

Skin contact

Wash skin with plenty of water.

Symptoms: Not expected to present a significant hazard under anticipated conditions of normal use.

Eye contact

Rinse eyes with water as a precaution.

Symptoms: Unlikely to cause more than transient stinging or redness if accidental eye contact occurs.

Ingestion

Rinse mouth. Call a poison center or a doctor if you feel unwell.

Symptoms: Bad taste. Damage to kidneys. The main component of this product is harmful by ingestion. Swallowing a small quantity of this material will result in serious health hazard.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray. Dry powder. Foam. Carbon dioxide.

Unsuitable media

Do not use a heavy water stream. Use of heavy stream of water may spread fire.

Specific hazards

Combustion generates: CO, CO2.

Instructions

Use water spray or fog for cooling exposed containers.

Firefighter Protection

Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ventilate spillage area. Do not breathe dust/fume/gas/mist/vapours/spray.

Large spill

Contain large spillage with sand or earth.

Environmental

Prevent soil and water pollution. Prevent entry to sewers and public waters.

Cleanup methods

Take up liquid spill into absorbent material.

Materials: absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Ensure good ventilation of the work station. Wear personal protective equipment. Do not breathe dust/fume/gas/mist/vapours/spray. Empty containers retain product residue (solid, liquid, and/or vapor) and can be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, static electricity, or other sources of ignition.

Storage

Store in a well-ventilated place. Keep cool.

Hygiene

Do no eat, drink or smoke when using this product. Always wash hands after handling the product.

Fire prevention

Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, static electricity, or other sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure good ventilation of the work station.

Hands

Protective gloves. Disposable gloves: Nitrile rubber (NBR), 6 (> 480 minutes), 0.4 mm, EN ISO 374. Disposable gloves: Butyl rubber, 6 (> 480 minutes), 0.7 mm, EN ISO 374. Neoprene or nitrile rubber gloves. Butyl-rubber protective gloves.

Eyes

Safety glasses. In case of splash hazard: safety glasses. Eye protection should only be necessary where liquid could be splashed or sprayed.

Respiratory

In case of insufficient ventilation, wear suitable respiratory equipment.

Skin/Body

Wear suitable protective clothing

Environmental

Avoid release to the environment.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Voc Content
---
Upper Explosive Limit
Not available
Physical State Data
liquid
Cloud Point
---
Dynamic Viscosity
---
Physical State
Liquid
Colour Intensity
---
Properties Status
---
Vapor Pressure
< 0,1 mPa
Melting Point
Not available
Solubility In Water
---
Crystallisation Point
---
Solubility In Fat
---
Density
1,127 kg/l ASTM D 4052
Odor
odourless.
Molecular Weight
---
Flash Point
> 120 °C ASTM D 93
Metal Corrosion
---
Flammability
Non flammable.
Relative Evaporation Rate
< 0,1
Vapor Density
---
Decomposition Temperature
Not available
Relative Density
Not available
Solubility
Miscible with water.
Partition Coefficient
< -0,1
Freezing Point
Not available
Auto Ignition Temperature
> 390 °C
Appearance
Viscous.
Softening Point
---
Evaporation Rate
---
Bulk Density
---
Odor Threshold
Not available
State Under Standard Conditions
---
Explosive Limits
---
Form
---
Colour
Green.
Kinematic Viscosity
Not available
Solidification Point
---
Boiling Point
160 – 200 °C
Ph
7,2
Lower Explosive Limit
Not available
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

Stable under normal conditions of use.

Hazardous reactions

Refer to

Avoid

Moisture. Overheating.

Incompatible

Strong oxidizing agents. Strong acids.

Decomposition

CO, CO2.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Eurol Antifreeze G11?

The signal word is warning.

What is the physical form of Eurol Antifreeze G11?

Eurol Antifreeze G11 is a liquid appearing as viscous. with green. color. It has odourless. odor.

What is the solubility of Eurol Antifreeze G11?

Miscible with water.

What is Eurol Antifreeze G11 used for?

Anti-freezing agents

What are the hazard statements for Eurol Antifreeze G11?

This substance has 2 hazard statements:

  • H302: Harmful if swallowed.
  • H373: May cause damage to organs (kidneys) through prolonged or repeated exposure (oral).

What is the melting point of Eurol Antifreeze G11?

The melting point is Not available and the boiling point is 160 – 200 °C.