Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RODOLITE BT
- Chemical Name
- BROOMCHLOORDIMETHYLHYDANTONE
Regulatory Identifiers
- CAS Number
- 32718-18-6 Check regulations →
- EC Number
- 251-171-5 Check regulations →
Identified Uses
SU23 Electricity, steam, gas water supply and sewage treatment PC37 Water treatment chemicals Water treatment
Uses advised against
Any use carrying a risk of direct contact with eyes/skin where workers are exposed without adequate personal protective equipment (PPE). Any use involving significant release of aerosol, vapour or dust in the breathing zone of workers where they are exposed without suitable respiratory protective equipment (RPE). Processes involving extreme heat use advised against. Processes involving the use of incompatible substances - refer to section 10. The product is stictly intended for industrial or professional use only.
Manufacturers & Suppliers
RODOL Ltd
manufacturer
Richmond Row Liverpool L3 3BP
Emergency Contacts
Emergency Contact
0044 (0)151 207 3161
not 24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| BROOMCHLOORDIMETHYLHYDANTONE EC: 251-171-5 | 32718-18-6 | --- | No |
*Biocide submitted under the Biocidal Products Regulation under CAS 32718-18-6. CAS 32718-18-6 is assigned to to a mixture of the 2 BCDMH isomers: 1-bromo-3-chloro-5,5-dimethyl hydantoin (CAS 16079-88-2) and 3-bromo-1-chloro-5,5-dimethyl hydantoin (CAS 126-06-7).
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
DO NOT DELAY! Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
DO NOT DELAY! Check for and remove any contact lenses. Rinse opened eye for several minutes under running water. Then consult a doctor.
DO NOT DELAY! Rinse out mouth and then drink plenty of water. Do not induce vomiting; call for medical help immediately. If vomiting occurs spontaneously, keep head below hips to prevent aspiration. Call for a doctor immediately.
Immediate Medical Attention
No further relevant information available.
Medical Treatment
Treat symptomatically and supportively.
Related Substances
Similar chemicals with comparable safety profiles
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses. Tightly sealed goggles.
Use suitable respiratory protective device in case of insufficient ventilation. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. If respiratory protection is required, institute a complete respiratory protection program including selection, fit testing, training, maintenance and inspection.
Protective work clothing. Body protection must be chosen depending on product properties, activity and possible exposure.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3085
- Packing Group
- III
Warning: Oxidising substances.
Warning: Oxidising substances.
Warning: Oxidising substances.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for RODOLITE BT?
The signal word is danger.
What is RODOLITE BT used for?
SU23 Electricity, steam, gas water supply and sewage treatment PC37 Water treatment chemicals Water treatment
What are the hazard statements for RODOLITE BT?
This substance has 5 hazard statements:
- H272: May intensify fire; oxidiser.
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
- H317: May cause an allergic skin reaction.
- H400: Very toxic to aquatic life.
What is the melting point of RODOLITE BT?
The melting point is 156 (decomp) C and the boiling point is Undetermined..