NextSDS Logo
Safety Data Sheet EN

RODOL L7R

How compliant is your chemical safety?

Free 2-minute compliance assessment

Check Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
RODOL L7R

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Product category PC37 Water treatment chemicals. Application of the substance / the mixture Water Treatment. The product is intended exclusively for industrial and professional use.

Uses advised against

Any use involving aerosol formation or vapour or dust release in excess of the assigned workplace exposure limits where workers are exposed without suitable respiratory protective equipment (RPE). Processes involving extreme heat use advised against. Any use carrying a risk of direct contact with eyes/skin where workers are exposed without adequate personal protective equipment (PPE). Processes involving the use of incompatible substances - refer to section 10.

Manufacturers & Suppliers

R

RODOL Ltd

manufacturer

Richmond Row Liverpool L3 3BP

Emergency Contacts

Emergency Contact

0044 (0)151 207 3161

(not 24 hours)

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Dam. Cat. 1 H318

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H318 Causes serious eye damage.

Precautionary Statements

P220 Keep away from acids.
P260 Do not breathe mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type Mixture

Mixture of substances listed below with nonhazardous additions.

Chemical Name CAS Number Concentration Hazardous
natriumdisulfiet EC: 231-673-0 7681-57-4 10 - 25% Yes

For the wording of the listed hazard phrases refer to section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air; consult doctor in case of complaints.

Skin contact

Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.

Eye contact

DO NOT DELAY! Check for and remove any contact lenses. Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Rinse out mouth and then drink plenty of water. Do not induce vomiting; call for medical help immediately. If vomiting occurs spontaneously, keep head below hips to prevent aspiration.

Medical Treatment

Treat symptomatically and supportively.

Related Substances

Similar chemicals with comparable safety profiles

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Protective gloves The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Eyes

Tightly sealed goggles

Respiratory

Use suitable respiratory protective device only when aerosol or mist is formed. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. If respiratory protection is required, institute a complete respiratory protection program including selection, fit testing, training, maintenance and inspection.

Skin/Body

Impervious protective clothing Body protection must be chosen depending on product properties, activity and possible exposure.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
---
Physical State Data
---
State Under Standard Conditions
---
Appearance
---
Colour
Clear
Colour Intensity
---
Form
Fluid
Odor
Mild
Odor Threshold
Not determined.
Ph
3 - 5
Melting Point
Undetermined.
Boiling Point
approx. 100
Flash Point
Cannot support combustion
Freezing Point
Undetermined.
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined.
Vapor Pressure
Not determined.
Vapor Density
Not determined.
Relative Density
Not determined.
Bulk Density
---
Density
1.2 g/cm3
Flammability
Not applicable.
Upper Explosive Limit
Not determined.
Lower Explosive Limit
Not determined.
Explosive Limits
---
Auto Ignition Temperature
Product is not self-igniting.
Decomposition Temperature
Not determined.
Solubility
---
Partition Coefficient
Not determined.
Solubility In Water
Fully miscible.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not determined.
Kinematic Viscosity
Not determined.
Properties Status
---
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Void
Shipping Name
Void
Transport Class
Void
Packing Group
Void
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for RODOL L7R?

The signal word is danger.

What is RODOL L7R used for?

Product category PC37 Water treatment chemicals. Application of the substance / the mixture Water Treatment. The product is intended exclusively for industrial and professional use.

What are the hazard statements for RODOL L7R?

This substance has 1 hazard statement:

  • H318: Causes serious eye damage.

What is the melting point of RODOL L7R?

The melting point is Undetermined. and the boiling point is approx. 100.

Compliance Scan

Free compliance check