Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DIRKO™ HT Grey
- Product Form
- Mixture
- Product Code
- 036.164 (70 ml), 610.023 (310 ml)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sealants
Uses advised against
No additional information available
Manufacturers & Suppliers
ElringKlinger AG
manufacturer
Max-Eyth-Straße 2, 72581 Dettingen/Erms - Germany
+49 (0)7123 724 799
Elring Parts Ltd
manufacturer
Unit 2, Derwent Court, Earlsway Team Valley Trading Estate, Gateshead, Tyne and Wear, NE11 TF - England
+44 191 4915678
DLAC Dienstleistungsagentur Chemie GmbH
Emergency Contacts
Giftinformationszentrum (GIZ-Nord) Universitätsmedizin Göttingen - Georg-August-Universität
+49 551 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Quartz EC: 238-878-4 | 14808-60-7 | 20 - 50% | Yes |
| Silica EC: 601-216-3 | 112945-52-5 | 5 - 10% | No |
| 2-Pentanone, O,O',O''-(ethenylsilylidyne)trioxime EC: 700-810-0 | 58190-62-8 | 1 - 5% | Yes |
| 2-Pentanone, O,O',O''-(methylsilylidyne)trioxime EC: 484-460-1 | 37859-55-5 | 1 - 5% | Yes |
| Titanium dioxide EC: 236-675-5 | 13463-67-7 | 1 - 5% | No |
| 3-aminopropyltriethoxysilane EC: 213-048-4 | 919-30-2 | 0.1 - 1% | Yes |
| Octamethylcyclotetrasiloxane EC: 209-136-7 | 556-67-2 | 0.01 - 0.079% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Remove/Take off immediately all contaminated clothing. Wash with plenty of soap and water.
Symptoms: The product is not considered irritating to the skin. May produce an allergic reaction.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Rinse mouth. Drink water as a precaution. Do NOT induce vomiting.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing agents that suit the environment. Carbon dioxide. Extinguishing powder. Water spray. For a significant fire: Alcohol resistant foam.
Do not use a heavy water stream.
Use water spray or fog for cooling exposed containers. Prevent fire-fighting water from entering environment.
Firefighter Protection
Use a self-contained breathing apparatus and also a protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel.
Wipe up with absorbent material (for example cloth).
Prevent entry to sewers and public waters.
Wipe up with absorbent material (for example cloth). Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible.
Materials: absorbent material (for example cloth), clay or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Avoid breathing vapours, spray. Avoid contact with skin and eyes. Wear personal protective equipment.
Store in original container. Keep container tightly closed. Store in a dry, cool and well-ventilated place. Protect from heat and direct sunlight.
Handle in accordance with good industrial hygiene and safety procedures. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. When using do not eat, drink or smoke. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide local exhaust or general room ventilation to minimize vapour concentrations.
Wear suitable gloves (EN 374 or equivalent). Short-term contact: nitrile/neoprene, ≥ 0.2 mm. Prolonged or repeated contact: nitrile, ≥ 1.25 mm. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Chemical goggles or safety glasses (EN ISO 16321 or equivalent).
Where exposure through inhalation may occur from use, respiratory protection equipment is recommended. Respiratory protection with filter type ABEK (EN 14387 or equivalent).
Wear suitable protective clothing (EN 14605, EN 13982 or equivalent).
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under use and storage conditions as recommended in section 7.
Vulcanizes at room temperature and on contact with humidity.
None under normal use.
High temperature.
Oxidizing agents. Water.
In case of fire: Carbon dioxide. Carbon monoxide. Toxic gases and vapours. Silicon oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of this material and its container at hazardous or special waste collection point. Do not empty into drains.
Empty the packaging completely prior to disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DIRKO™ HT Grey?
The signal word is no signal word.
What is the physical form of DIRKO™ HT Grey?
DIRKO™ HT Grey is a solid. paste. appearing as solid. paste. grey. with grey color. It has no data available odor.
What is the solubility of DIRKO™ HT Grey?
Water: practically insoluble; Acetone, Alcohol: slightly soluble; Aliphatic/aromatic hydrocarbons: dispersible; Chlorinated solvents: dispersible
What is DIRKO™ HT Grey used for?
Sealants
What is the melting point of DIRKO™ HT Grey?
The melting point is No data available and the boiling point is No data available.