Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RENOLIT LX-PEP 2
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricating grease
Uses advised against
No uses advised against identified.
Manufacturers & Suppliers
Fuchs Europe Schmierstoffe GmbH
manufacturer
Friesenheimer Str. 19, 68169 Mannheim
0621 3701-0
Fuchs Europe Schmierstoffe GmbH Abteilung Produktsicherheit
manufacturer
0621 3701-1333
Fuchs Europe Schmierstoffe GmbH
national supplier
708-333-8900
Emergency Contacts
Emergency Contact
800-255-3924
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS09
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Lubricating grease: Thickener system and additives in solvent refined mineral oil.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ZnDTP | 85940-28-9 | 1 - 2.4% | No |
* All concentrations are percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume. # This substance has workplace exposure limit(s).
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of symptoms.
Wash with soap and water. The product is not skin irritating.
Promptly wash eyes with plenty of water while lifting the eye lids.
Rinse mouth thoroughly.
Immediate Medical Attention
Get medical attention if symptoms occur.
Medical Treatment
Get medical attention if symptoms occur.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, fire extinguishing powder or fog like water spraying. Extinguish larger fires with alcohol resistant foam or spray water with suitable tensides added
Water with a full water jet.
During fire, gases hazardous to health may be formed.
No data available.
Firefighter Protection
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Not required.
Avoid release to the environment. Environmental manager must be informed of all major spillages. Prevent further leakage or spillage if safe to do so. Do not allow to enter drainage system, surface or ground water.
Scrape up spillage or absorb with absorbing material.
Materials: absorbing material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices.
Local regulations concerning handling and storage of waterpolluting products have to be followed.
Observe good industrial hygiene practices.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No data available.
Stable under normal temperature conditions and recommended use.
None under normal conditions.
Avoid heat or contamination.
Strong oxidizing substances. Strong acids. Strong bases.
Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for RENOLIT LX-PEP 2?
The signal word is no signal word.
What is the physical form of RENOLIT LX-PEP 2?
RENOLIT LX-PEP 2 is a solid with green color. It has characteristic odor.
What is RENOLIT LX-PEP 2 used for?
Lubricating grease
What are the hazard statements for RENOLIT LX-PEP 2?
This substance has 2 hazard statements:
- EUH210: Safety data sheet available for professional user on request.
- H400: Environmental hazards: This product is water polluting.
What is the melting point of RENOLIT LX-PEP 2?
The melting point is No data available. and the boiling point is Not applicable.