NextSDS Logo
Safety Data Sheet EN

Akua Mag Mix

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Akua Mag Mix
Product Form
Liquid formulation

Regulatory Identifiers

CAS Number
N/A

Identified Uses

The product is a liquid formulation intended to be used for printmaking projects. The product is intended to be mixed with Akua Intaglio Inks to add depth and stiffen the ink, and is applied using a knife, brush or a roller. The product is intended for general arts and crafts purposes.

Manufacturers & Suppliers

S

Speedball Europe

manufacturer

Villantipolis 5, 473 route des Dollines, 06560 Valbonne, France

+33 6 03 36 21 73

Emergency Contacts

Infotrac

1-352-323-3500

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

The ingredients in the product are considered non-hazardous and were therefore not disclosed in the SDS.

Notes

The ingredients in the product are considered non-hazardous and were therefore not disclosed in the SDS.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

No specific first aid measures are required. Inhalation route of exposure is not anticipated with intended use. If exposed to excessive levels of material in the air, move the exposed person to fresh air. Seek medical attention if in doubt.

Skin contact

No specific first aid measures are required. Wash skin thoroughly with soap and water. If skin irritation or rash occurs get medical attention. Launder contaminated clothing before reuse.

Symptoms: skin irritation or rash

Eye contact

No specific first aid measures are required. As a precaution, remove contact lenses, if worn, and immediately flush eyes with water. Seek medical attention if in doubt.

Ingestion

No specific first aid measures are required. Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Seek medical attention if in doubt.

Immediate Medical Attention

Seek medical attention if in doubt.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing media suitable for surrounding area if material is involved in a fire (e.g., water fog, water spray, foam, dry chemical or carbon dioxide).

Unsuitable media

None known

Specific hazards

Material will not burn until water has been evaporated. Container may rupture on heating. See also Section 10 - Stability and Reactivity.

Firefighter Protection

Wear a self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Keep unauthorized personnel away.

Environmental

Prevent further leakage or spillage if it is safe to do so.

Cleanup methods

Collect recoverable product and place in a designated container for recycle and/or disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes. Avoid breathing dust/fume/gas/mist/vapors/spray. Provide adequate ventilation. Observe good industrial hygiene practices. When using do not eat, drink or smoke. Wear appropriate personal protective equipment. Keep containers closed when not in use. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Launder contaminated clothing before reuse.

Storage

Keep from freezing. Do not store in open, unlabeled or mislabeled containers. Store away from incompatible materials.

Hygiene

Observe good industrial hygiene practices. When using do not eat, drink or smoke. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Launder contaminated clothing before reuse.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No special requirements under ordinary conditions of use and with adequate ventilation. Mechanical ventilation or local exhaust ventilation may be required.

Hands

No special hand or skin protection is generally required. Use good industrial hygiene practices to avoid skin contact. If contact with the material may occur, wear chemically protective gloves.

Eyes

If contact is likely, safety glasses with side shields are recommended.

Respiratory

Under normal conditions of use, respirator is not usually required. Use appropriate respiratory protection if exposure to dust particles, mist or vapors is likely. Consult with an industrial hygienist to determine the appropriate respiratory protection for your specific use of this material. A respiratory protection program compliant with all applicable regulations must be followed whenever workplace conditions require the use of a respirator.

Skin/Body

Gloves, coveralls, apron, boots as necessary to minimize contact. Do not wear rings, watches or similar apparel that could entrap the material.

Environmental

Not available

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Liquid
Colour
White
Colour Intensity
---
Form
Liquid
Odor
Not available
Odor Threshold
Not available
Ph
Not available
Melting Point
---
Boiling Point
Not available
Flash Point
Not available
Freezing Point
Not available
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not available
Vapor Pressure
Not available
Vapor Density
Not available
Relative Density
Not available
Bulk Density
---
Density
---
Flammability
Not available
Upper Explosive Limit
Not available
Lower Explosive Limit
Not available
Explosive Limits
---
Auto Ignition Temperature
Not available
Decomposition Temperature
Not available
Solubility
Not available
Partition Coefficient
Not available
Solubility In Water
Not available
Solubility In Fat
---
Molecular Weight
Not available
Voc Content
Not available
Metal Corrosion
---
Dynamic Viscosity
Not available
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

This material is considered stable under normal handling and storage conditions.

Reactivity

No data available

Hazardous reactions

None known

Avoid

None known

Incompatible

Contact with acids, bases and strong oxidizing agents

Decomposition

Thermal decomposition or combustion may generate smoke, carbon monoxide, carbon dioxide, and other products of incomplete combustion. Irritating and toxic substances may be emitted upon combustion, burning, or decomposition of dry solids.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Use product for its intended purpose or recycle if possible. Dispose of waste in accordance with local, regional, national, and/or international regulations.

Disposal

Use product for its intended purpose or recycle if possible.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not regulated
Shipping Name
Not regulated
Transport Class
Not regulated
Packing Group
Not regulated
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Akua Mag Mix?

The signal word is no signal word.

What is the physical form of Akua Mag Mix?

Akua Mag Mix is a liquid appearing as liquid with white color. It has not available odor.

What is the solubility of Akua Mag Mix?

Not available

What is Akua Mag Mix used for?

The product is a liquid formulation intended to be used for printmaking projects. The product is intended to be mixed with Akua Intaglio Inks to add depth and stiffen the ink, and is applied using a knife, brush or a roller. The product is intended for general arts and crafts purposes.