NextSDS Logo
Safety Data Sheet EN

AOT PREMIX

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
AOT PREMIX
Product Form
Mixture

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Process Chemical

Manufacturers & Suppliers

C

Cytec Industries Inc.

manufacturer

Five Garret Mountain Plaza, Woodland Park, New Jersey 07424, USA.

1-800/652-6013

C

Cytec Industries Inc.

local supplier

Abenbury Way, Wrexham Industrial Estate, Wrexham Clwyd LL139UZ, GB

+44 1-97866-5200

Emergency Contacts

Emergency Contact

+61-3-9663-2130

Emergency Contact

1800-033-111

NRCC

+86 0532 83889090

Emergency Contact

+61-3-9663-2130

Emergency Contact

+61-3-9663-2130

Emergency Contact

0800-734-607

Carechem24 Singapore

+65 3158 1074

Cytec Welland, Canada plant

+1-905-356-8310

Carechem24 UK

+44 (0) 1235 239 670

Carechem24 UK

+44 (0) 1235 239 671

SUATRANS

0800 7077 022

CITUC QUIMICO

+56-2-247-3600

Cytec Atequiza, Mexico plant

+52-376-73 74122

CHEMTREC #CCN6083

+1-703-527-3887

CHEMTREC #CCN6083

1-800-424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2
Repr. Cat. 2
STOT RE Cat. 2
STOT SE Cat. 3
Skin Irrit. Cat. 2
Asp. Tox. Cat. 1

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H225 Highly flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.
H361 Suspected of damaging fertility or the unborn child.
H373 May cause damage to organs through prolonged or repeated exposure.

Precautionary Statements

P201 Obtain special instructions before use.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ventilating/lighting/equipment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash face, hands and any exposed skin thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P303 + P361 + P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P308 + P313 IF exposed or concerned: Get medical advice/attention.
P312 Call a POISON CENTER or doctor/physician if you feel unwell.
P321 Specific treatment (see supplemental first aid instructions on this label).
P331 Do NOT induce vomiting.
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P362 Take off contaminated clothing and wash before reuse.
P370 + P378 In case of fire: Use CO2, dry chemical, or foam for extinction.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local and national regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Toluene EC: 203-625-9 108-88-3 60 - 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.

Skin contact

Remove contaminated clothing and shoes without delay. Wash immediately with plenty of water. Do not reuse contaminated clothing without laundering. Get medical attention if pain or irritation persists after washing or if signs and symptoms of overexposure appear.

Eye contact

Rinse immediately with plenty of water for at least 15 minutes. Obtain medical advice if there are persistent symptoms.

Ingestion

If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give anything by mouth to an unconscious person.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water spray, alcohol foam, carbon dioxide or dry chemical to extinguish fires.

Unsuitable media

Water stream may be ineffective.

Specific hazards

Keep containers cool by spraying with water if exposed to fire.

Instructions

Keep containers cool by spraying with water if exposed to fire.

Firefighter Protection

Firefighters, and others exposed, wear self-contained breathing apparatus. Wear full firefighting protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

None known

Cleanup methods

sweep up and place in a waste disposal container

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep away from heat, sparks and flame. Avoid contact with eyes. Avoid contact with skin. Keep container closed. Use with adequate ventilation. Wash thoroughly after handling.

Storage

Store in accordance with local, state, and federal regulations.

Hygiene

Wash thoroughly after handling.

Fire prevention

Keep away from heat, sparks and flame.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Where this material is not used in a closed system, good enclosure and local exhaust ventilation should be provided to control exposure.

Hands

Wear impermeable gloves. Replace gloves immediately when torn or any change in appearance (dimension, colour, flexibility etc) is noticed. The chemical resistance depends on the type of product and amount of product on the glove. Therefore gloves need to be changed when in contact with chemicals. Due to many conditions (e.g. temperature, abrasion) the practical usage of a chemical protective glove in practice may be much shorter than the permeation time determined through testing.

Eyes

Wear eye/face protection such as chemical splash proof goggles or face shield. Eyewash equipment and safety shower should be provided in areas of potential exposure.

Respiratory

Where exposures are below the established exposure limit, no respiratory protection is required. Where exposures exceed the established exposure limit, use respiratory protection recommended for the material and level of exposure.

Skin/Body

Avoid skin contact. Wear impermeable gloves and suitable protective clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solidification Point
---
Density
0.87
Flash Point
4 °C closed cup(value for toluene)
State Under Standard Conditions
---
Decomposition Temperature
Not available
Ph
Not available
Appearance
clear liquid
Metal Corrosion
---
Odor Threshold
See Section 8 for exposure limits.
Freezing Point
---
Kinematic Viscosity
Not available
Colour Intensity
---
Cloud Point
---
Solubility
---
Partition Coefficient
Not available
Molecular Weight
---
Vapor Pressure
29.1 hPa @ 20 °C (value for toluene)
Boiling Point
110 - 111 °C (value for toluene)
Flammability
---
Auto Ignition Temperature
535 °C (value for toluene)
Solubility In Water
Not available
Relative Evaporation Rate
---
Evaporation Rate
Not available
Upper Explosive Limit
7 (values for toluene)
Explosive Limits
---
Properties Status
---
Bulk Density
---
Odor
characteristic
Form
---
Physical State
clear liquid
Crystallisation Point
---
Physical State Data
liquid
Vapor Density
Not available
Softening Point
---
Dynamic Viscosity
Not available
Solubility In Fat
Not available
Lower Explosive Limit
1.2 (values for toluene)
Voc Content
Not available
Melting Point
- 93 °C
Colour
clear
Relative Density
0.87
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable

Reactivity

No information available

Hazardous reactions

Will not occur

Avoid

Keep away from heat, spark and flame. Protect from heat.

Incompatible

Oxidizing agents acids bases

Decomposition

oxides of carbon, oxides of nitrogen, oxides of sulfur (includes sulfur di and tri oxides), When heated to decomposition, it emits toxic fumes., sodium oxide

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

The Company encourages the recycle, recovery and reuse of materials, where permitted. If disposal is necessary, The Company recommends that organic materials, especially when classified as hazardous waste, be disposed of by thermal treatment or incineration at approved facilities.

Disposal

The Company recommends that organic materials, especially when classified as hazardous waste, be disposed of by thermal treatment or incineration at approved facilities.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1294
Shipping Name
Toluene
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for AOT PREMIX?

The signal word is danger.

What is the physical form of AOT PREMIX?

AOT PREMIX is a clear liquid appearing as clear liquid with clear color. It has characteristic odor.

What is AOT PREMIX used for?

Process Chemical

What are the hazard statements for AOT PREMIX?

This substance has 6 hazard statements:

  • H225: Highly flammable liquid and vapour.
  • H304: May be fatal if swallowed and enters airways.
  • H315: Causes skin irritation.
  • H336: May cause drowsiness or dizziness.
  • H361: Suspected of damaging fertility or the unborn child.
  • H373: May cause damage to organs through prolonged or repeated exposure.

What is the melting point of AOT PREMIX?

The melting point is - 93 °C and the boiling point is 110 - 111 °C (value for toluene).