Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Soudafoam SMX
- Product Form
- Aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Professional use, Consumer use, Insulating agents, Fillers
Uses advised against
No additional information available
Manufacturers & Suppliers
Soudal N.V.
manufacturer
Everdongenlaan 18-20, 2300 Turnhout, Belgium
+32 14 42 42 31
http://www.Soudal.com
Emergency Contacts
BIG
+32 14 58 45 45
24h/24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Product subject to CLP Article 1.1.3.7. The disclosure rules of the components is modified in this case.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| dimethyl ether EC: 204-065-8 | 115-10-6 | 5 - 10% | Yes |
| isobutane EC: 200-857-2 | 75-28-5 | 5 - 10% | Yes |
| trimethoxyphenylsilane EC: 221-066-9 | 2996-92-1 | 1 - 5% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 1 - 5% | Yes |
Notes
Product subject to CLP Article 1.1.3.7. The disclosure rules of the components is modified in this case.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Respiratory problems: consult a doctor/medical service.
Rinse skin with water/shower. If skin irritation or rash occurs: Get medical advice/attention.
Rinse eyes with water as a precaution. Remove contact lenses, if present and easy to do. Continue rinsing. Consult an ophthalmologist if irritation persists.
Symptoms: In the event of exposure to high concentrations : Redness of the eye tissue.
Rinse mouth out with water. Get medical advice/attention if you feel unwell.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Foam. Carbon dioxide.
None known.
Extremely flammable aerosol. Pressurised container: May burst if heated.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area. No open flames, no sparks, and no smoking.
Avoid release to the environment.
Mechanically recover the product. Leave the product to solidify. Carefully collect the spill/leftovers. Take collected spill to manufacturer/competent authority. Wash clothing and equipment after handling.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Wear personal protective equipment. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use.
Protect from sunlight. Do not expose to temperatures exceeding 50 °C/ 122 °F. Store in a well-ventilated place. Keep cool.
Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Protective gloves
Safety glasses
[In case of inadequate ventilation] wear respiratory protection.
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Extremely flammable aerosol. Pressurised container: May burst if heated.
No dangerous reactions known under normal conditions of use.
Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition.
No additional information available
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/container in accordance with licensed collector's sorting instructions.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Soudafoam SMX?
The signal word is danger.
What is the physical form of Soudafoam SMX?
Soudafoam SMX is a liquid appearing as aerosols. with variable. color. It has characteristic. odor.
What is the solubility of Soudafoam SMX?
Not available
What is Soudafoam SMX used for?
Professional use, Consumer use, Insulating agents, Fillers
What are the hazard statements for Soudafoam SMX?
This substance has 2 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
What is the melting point of Soudafoam SMX?
The melting point is Not applicable and the boiling point is Not available.