Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SOUDAL Soudafoam 1K
- Product Form
- Aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Professional use, Consumer use; Polyurethane
Manufacturers & Suppliers
Soudal N.V.
manufacturer
Everdongenlaan 18-20, 2300 Turnhout, Belgium
+32 14 42 42 31
http://www.Soudal.com
Emergency Contacts
National Poisons Information Centre Beaumont Hospital
+353 1 809 2566
Healthcare professionals-24/7
National Poisons Information Centre Beaumont Hospital
+353 1 809 2166
public,8am - 10pm, 7/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| polymethylene polyphenyl isocyanate | 9016-87-9 | 25 - 50% | Yes |
| alkanes, C14-17, chloro EC: 287-477-0 | 85535-85-9 | 10 - 25% | Yes |
| isobutane EC: 200-857-2 | 75-28-5 | 10 - 25% | Yes |
| dimethyl ether EC: 204-065-8 | 115-10-6 | 5 - 10% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 5 - 10% | Yes |
Notes
polymethylene polyphenyl isocyanate, contains > 0.1% MDI isomers
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Call a poison center or a doctor if you feel unwell.
Symptoms: May cause respiratory irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs: Get medical advice/attention.
Symptoms: Irritation. May cause an allergic skin reaction.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Symptoms: Eye irritation.
Call a poison center or a doctor if you feel unwell.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Foam. Carbon dioxide.
None known.
Extremely flammable aerosol. Explosion risk in case of fire. Pressurised container: May burst if heated.
Evacuate area. Do not fight fire when fire reaches explosives.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area. No open flames, no sparks, and no smoking. Do not breathe spray, mist, vapours. Avoid contact with skin and eyes.
Avoid release to the environment.
Mechanically recover the product. Carefully collect the spill/leftovers.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear personal protective equipment. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Avoid contact during pregnancy/while nursing. Do not breathe vapours, spray, mist. Use only outdoors or in a well-ventilated area. Avoid contact with skin and eyes.
Protect from sunlight. Do not expose to temperatures exceeding 50 °C/ 122 °F. Store locked up. Store in a well-ventilated place. Keep container tightly closed. Keep cool.
Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Protective gloves against chemicals (EN 374). Nitrile rubber (NBR): Permeation 6 (> 480 minutes), Thickness ≥ 0.35 mm, Standard EN ISO 374. Neoprene rubber (HNBR): Permeation 6 (> 480 minutes), Thickness ≥ 0.5 mm, Standard EN ISO 374.
Safety glasses (EN 166)
This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used
Protective clothing (EN 14605 or EN 13034)
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Extremely flammable aerosol. Pressurised container: May burst if heated.
Polymerisation risk. Reacts with (some) acids/bases.
Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition.
Strong acids. Strong bases.
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SOUDAL Soudafoam 1K?
The signal word is danger.
What is the physical form of SOUDAL Soudafoam 1K?
SOUDAL Soudafoam 1K is a liquid appearing as aerosols. with white. color. It has characteristic. odor.
What is the solubility of SOUDAL Soudafoam 1K?
Insoluble.
What is SOUDAL Soudafoam 1K used for?
Professional use, Consumer use; Polyurethane
What are the hazard statements for SOUDAL Soudafoam 1K?
This substance has 11 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- H335: May cause respiratory irritation.
- H351: Suspected of causing cancer.
- H362: May cause harm to breast-fed children.
- H373: May cause damage to organs through prolonged or repeated exposure.
- H413: May cause long lasting harmful effects to aquatic life.
What is the melting point of SOUDAL Soudafoam 1K?
The melting point is Not applicable and the boiling point is Not available.