NextSDS Logo
Safety Data Sheet EN

TD1222047

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TD1222047
Product Code
TD1222047

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricant oil.

Uses advised against

This product should not be used for other purposes than those specified without the advice of an expert.

Manufacturers & Suppliers

P

PETRONAS LUBRICANTS ITALY S.P.A.

manufacturer

Via Santena 1, 10029 Villastellone (Torino)

+39.01196131

Emergency Contacts

Emergency Answer Service

+44 1235 239670

24h/7d

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Asp. Tox. Cat. 1

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H304 May be fatal if swallowed and enters airways.

Precautionary Statements

P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor/...
P331 Do NOT induce vomiting.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local, regional, national, international regulation

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Severely refined mineral and/or synthetic oils, additives.

Chemical Name CAS Number Concentration Hazardous
1-Decene, homopolymer, hydrogenated 68037-01-4 40 - 50% Yes
Lubricating oils, petroleum, C20-50-hydrotreated neutral oil-based EC: 276-738-4 72623-87-1 20 - 30% Yes
1-Dodecene, Dimer Hydrogenated EC: 417-060-2 151006-61-0 12.5 - 15% Yes
1-Decene, tetramer, mixed with 1-decene trimer, hydrogenated EC: 614-695-9 68649-12-7 6.25 - 10% Yes
Severely refined paraffinic mineral and synthetic oils, viscosity 40°C <=20.5 cSt (**) --- 6.25 - 10% Yes
Dibutyl phosphonate EC: 217-316-1 1809-19-4 1 - 1.5% Yes
Reaction Products of Diphosphorus Pentaoxide with Alcohols, C14-18 even, salted with Amines, C12-14, Tert-alkyl EC: 943-540-0 --- 0.95 - 1% Yes

(*)DECLL The mineral base oils contained in this product are severely refined and contain less than 3% DMSO extract according to IP 346 method, and are therefore not classified as carcinogen according to Regulation (EC) No 1272/2008, note L. The classification as a carcinogen need not apply if it can be shown that the substance contains less than 3% DMSO extract as measured by IP 346 "Determination of polycyclic aromatics in unused lubricating base oils and asphaltene free petroleum fractions - Dimethyl sulphoxide extraction refractive index method", Institute of Petroleum, London. This note applies only to certain complex oil-derived substances in Part 3. ** ) Contains one or more among the following: CAS: 64742-65-0; 64742-54-7; 64742-55-8; 101316-72-7; 72623-87-1; 64741-89-5 / EC: 265-169-7; 265-157-1; 265-158-7; 309-877-7; 276-738-4; 265-091-3 / Registration numbers: 01-2119471299-27-XXXX; 01-2119484627-25-XXXX; 01-2119487077-29-XXXX; 01- 2119489969-06-XXXX; 01-2119474889-13-XXXX; 01-2119487067-30-XXXX H-phrases and list of abbreviations: see heading 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Expose affected person to fresh air and obtain medical attention if necessary.

Skin contact

Remove contaminated clothes and shoes and rinse thoroughly with plenty of water and soap.

Eye contact

Rinse thoroughly with plenty of water for at least 10 minutes keeping eyelids open. Remove contact lenses if this can be done easily. Obtain medical attention in case of development and persistence of pain and redness. In case of contact with hot product, rinse thoroughly with plenty of water to dissipate heat. Obtain immediate medical attention to assess eye conditions and the correct treatment to be practiced.

Symptoms: pain and redness

Ingestion

Obtain IMMEDIATE MEDICAL ATTENTION if the product has been swallowed and show label or package. Do not induce absolutely vomiting to avoid aspiration into the respiratory tracts. If vomiting occurs spontaneously, keep head down to avoid the risk of aspiration into the lungs. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Obtain IMMEDIATE MEDICAL ATTENTION if the product has been swallowed and show label or package. Obtain immediate medical attention to assess eye conditions and the correct treatment to be practiced.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use foam, carbon dioxide, dry chemical powder and water mist. Suitable extinguishing media: Water, Carbon dioxide (CO2).

Unsuitable media

Avoid high pressure water jet. None in particular.

Specific hazards

Don't breathe combustion fumes: fire can form harmful compounds. Do not inhale explosion and combustion gases. Burning produces heavy smoke.

Instructions

Cool down with water the containers don't get involved in fire to avoid their possible explosion. Move undamaged containers from immediate hazard area if it can be done safely.

Firefighter Protection

Use suitable breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid ingestion of product. Avoid contact with skin and eyes by wearing appropriate protective clothing. Avoid to breathe fumes and aerosols. Surfaces on which the product has been spilled may become slippery. Wear personal protection equipment.

Small spill

Contain small spills with absorbent material.

Large spill

In case of large spills dike, absorb and shovel up into suitable containers for disposal.

Environmental

Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. Retain contaminated washing water and dispose it.

Cleanup methods

shovel up into suitable containers for disposal. Put dirty material in suitable container.

Materials: suitable containers

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid ingestion. Avoid frequent and prolonged skin contact and contact with eyes. Provide adequate ventilation to avoid mist or aerosol. Don't smoke or use spare flames; avoid contact with spark or other sources of ignition. Don't work near open container to avoid high concentration of vapours. Don't eat or drink during use.

Storage

Store under cover in the original container securely closed away from heat and sources of ignition. Do not store in the open air. Assure a correct ventilation of premises and the control of possible leak. Keep out of flame or spark and avoid the accumulation of electrostatic charges. Keep out of reach of children and away from food and drink.

Hygiene

Don't eat or drink during use.

Fire prevention

Don't smoke or use spare flames; avoid contact with spark or other sources of ignition. Keep out of flame or spark and avoid the accumulation of electrostatic charges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Avoid production and diffusion of mist and aerosol with utilization of localized ventilation/aspiration or other required precautions.

Hands

Wear suitable gloves (i.e. neoprene, nitrile). Gloves should be changed when they show wear. The kind of gloves and the term of use must be decided from employer with regard to processing and to allow for DPI legislation and glove producer's indications. Wear gloves only with clean hands.

Eyes

Chemical goggles and face shield in case of oil splashes.

Respiratory

None required under normal conditions of use. Use approved full face respirator with organic vapour filter cartridge if the recommended exposure limits are exceeded.

Skin/Body

Wear suitable protective clothing (for further information, refer to CEN-EN 14605); change it immediately in case of large contamination and wash it before subsequent use.

Environmental

Adopt all required precaution to avoid product immission in environment (e.g., blasting systems, catch basins, ...). Refer to technical precautions and also to sections 6.2, 6.3, 7.2, 12 and 13.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Kinematic Viscosity
15.20 CST
Decomposition Temperature
N.A.
Colour
---
Flammability
N.A.
Boiling Point
>300 °C (572 °F)
Voc Content
N.A.
Softening Point
---
Dynamic Viscosity
---
Density
0.83 G/CM3
Ph
N.A.
Form
---
Molecular Weight
---
Auto Ignition Temperature
N.A.
Relative Density
---
Relative Evaporation Rate
---
Solubility
---
Bulk Density
---
Vapor Density
N.A.
Evaporation Rate
---
Explosive Limits
---
Solubility In Fat
N.A.
Metal Corrosion
---
Solidification Point
---
Flash Point
160 °C (320 °F)
Physical State Data
liquid
State Under Standard Conditions
---
Crystallisation Point
---
Partition Coefficient
N.A.
Melting Point
N.A.
Upper Explosive Limit
N.A.
Physical State
LIQUID
Appearance
VISCOUS
Colour Intensity
---
Properties Status
---
Vapor Pressure
N.A.
Lower Explosive Limit
N.A.
Solubility In Water
IMMISCIBLE
Odor Threshold
NOT RELEVANT
Odor
NOT RELEVANT
Freezing Point
N.A.
Cloud Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable under normal conditions of use.

Reactivity

Read carefully all information provided in other sections of heading 10.

Hazardous reactions

Not expected under normal conditions of use.

Avoid

This product must be kept far from heat sources. In any case, avoid exposing product to temperatures above the flash point.

Incompatible

Strong oxidizing agents, hard acids and bases.

Decomposition

Oxides of carbon, compounds of sulphur, phosphorus, nitrogen and hydrogen sulfide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Recover, if possible. Send to authorised disposal plants or for incineration under controlled conditions.

Disposal

Dispose in accordance with local or national regulations via authorised person/licensed waste disposal contractor.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Regulation (EC) No 1272/2008, Regulation (EC) No 1907/2006, and related national and European legislations regarding classification, labelling, packaging, and worker safety.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TD1222047?

The signal word is danger.

What is the physical form of TD1222047?

TD1222047 is a liquid appearing as viscous . It has not relevant odor.

What is TD1222047 used for?

Lubricant oil.

What are the hazard statements for TD1222047?

This substance has 1 hazard statement:

  • H304: May be fatal if swallowed and enters airways.

What is the melting point of TD1222047?

The melting point is N.A. and the boiling point is >300 °C (572 °F).