Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MICROLUBE GB 0
- Product Form
- Grease
- Product Code
- 020232
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Grease
Uses advised against
Restricted to professional users.
Manufacturers & Suppliers
Klber Lubrication Mnchen GmbH & Co. KG
manufacturer
Geisenhausenerstr. 7 81379 Mnchen Deutschland
+49 (0) 89 7876 0
Klber Lubrication Belgium Netherlands
national supplier
Rue Cardinal Mercier 100 7711 Dottignies Belgium
+32 56 483333
Emergency Contacts
Antigifcentrum / Centre antipoisons
070 245 245
Emergency Contact
+49 89 7876 700
24 hrs
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mineral oil. lithium soap silicate
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| vetzuren, C16-18- en C18-onverzadigde, methylesters, gezwaveld EC: 269-913-1 | 68390-93-2 | 2.5 - 10% | Yes |
| Phosphorodithioic acid, mixed O,O-bis(2- ethylhexyl and iso-Bu and iso-Pr) esters, zinc salts EC: 288-917-4 | 85940-28-9 | 1 - 2.5% | Yes |
| 1,3,4-Thiadiazolidine- 2,5-dithione, reaction products with hydro- gen peroxide and tert- dodecanethiol EC: 939-692-2 | --- | 1 - 2.5% | Yes |
| dibutyl [[bis[(2- ethylhex- yl)oxy]phosphinothioyl ]thio]succinate EC: 270-220-1 | 68413-48-9 | 0.25 - 1% | Yes |
| Benzenesulfonic acid, di-C10-14-alkyl derivs., calcium salts EC: 939-603-7 | --- | 0.1 - 1% | Yes |
| residual oils (petrole- um), solvent-dewaxed EC: 265-166-0 | 64742-62-7 | 50 - 70% | No |
| Destillaten (petroleum), waterstofbehandeld zwaar paraffenisch EC: 265-157-1 | 64742-54-7 | 10 - 20% | No |
| Distillates (petroleum), hydrotreated heavy naphthenic; Baseoil - unspecified EC: 265-155-0 | 64742-52-5 | 1 - 10% | No |
| lithium 12- hydroxystearate EC: 231-536-5 | 7620-77-1 | 1 - 10% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air. If signs/symptoms continue, get medical attention. Keep patient warm and at rest. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. If breathing is irregular or stopped, administer artificial respira- tion.
Take off all contaminated clothing immediately. Wash off immediately with soap and plenty of water. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. Seek medical advice.
Move the victim to fresh air. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Get medical attention immediately if irritation develops and persists.
Medical Treatment
The first aid procedure should be established in consultation with the doctor responsible for industrial medicine. Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material: Nitrile rubber; Break through time: > 10 min; Protective index: Class 1. Remarks: Wear protective gloves. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.
Safety glasses with side-shields
Not required; except in case of aerosol formation. Filter type: Filter type P
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MICROLUBE GB 0?
The signal word is warning.
What is the physical form of MICROLUBE GB 0?
MICROLUBE GB 0 is a paste with red color. It has characteristic odor.
What is MICROLUBE GB 0 used for?
Grease
What are the hazard statements for MICROLUBE GB 0?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of MICROLUBE GB 0?
The melting point is No data available and the boiling point is No data available.