Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MBO No Clean Fluxes
- Product Code
- 40S2 - 40S2A - 40S2AS - 40S2AM - 40S2AT - 40S2ADM - 40S2D - 40S2S - 40S2S* - 40S2SL - 40S2SLV - 45 - 45D - 50S1 - 50S2 - 50S2A - 50S2AM - 50S2AMS - SN2B - SN2C - SN2D - UNIFLUX Lsi - UNIFLUX Lsd
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For fluxing in soft soldering process.
Manufacturers & Suppliers
M.B.O.
manufacturer
Rue de la Fonderie, 21806 CHEVIGNY-SAINT-SAUVEUR CEDEX
03.80.46.12.58
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Organic Acids | --- | 4% | Yes |
| Isopropylique Alcohol EC: 200-661-7 | 67-63-0 | 95% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
remove patient to fresh air, if not breathing give artificial respiration. Seek medical attention.
wash immediately with soap and plenty of water at least for 3 minutes.
Flush immediately with copious quantities of water for at least 15 minutes. Initial first aid should be administered to avoid any eye damage. Seek medical attention.
Seek medical attention
Immediate Medical Attention
Seek medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
dry powder or CO₂
water
Firefighter Protection
gloves, glasses, breathing mask
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid all heating source to avoid fire. Recover product by using absorbing non-combustible material. Wash residues with appropriate solvent (alcohol). Rinse with plenty of water. Use appropriate equipment: gloves, glasses, breathing mask. Retain waste in special sealed containers (elimination: see § 13).
Recover product by using absorbing non-combustible material. Wash residues with appropriate solvent (alcohol). Rinse with plenty of water.
Materials: absorbing non-combustible material, solvent (alcohol), water
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not eat or drink during the use of the product. Do not fume. Avoid contact with eyes or skin. In case of eyes contact, flush immediately with plenty of water and seek medical attention. Use appropriate gloves (see § 8). Use only in well ventilated areas. Wash hands after use.
In original sealed containers at room temperature, keep away from inclemency.
Do not eat or drink during the use of the product. Wash hands after use.
keep away from any flame or sparkle. Do not fume. Avoid accumulation of electrostatic charges, electrical material, including lighting, in accordance with standard regulation.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use appropriate gloves especially dedicated for the manipulation of alcohol based products (impermeable rubber, latex...)
It is highly recommended to wear safety glasses.
In case of vapours, use breathing mask with adapted filters or autonomic respiratory system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Steady product in normal conditions of use.
No dangerous product formed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
burning
Product can be eliminated by burning.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1219
- Transport Class
- Class 3
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Classification: Easily flammable (F), Irritant (Xi). Risk phrases: R11 (easily flammable), R36 (irritant for eyes), R67 (inhalation of vapour could cause sleepiness and giddiness). Safety phrases: S7 (Keep in sealed containers), S16 (keep away from any flame, or any source of sparkles. Do not fume), S24/25 (avoid eyes or skin contact), S26 (In case of eyes contact, flush immediately with plenty of water and seek medical attention).
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MBO No Clean Fluxes?
The signal word is no signal word.
What is the physical form of MBO No Clean Fluxes?
MBO No Clean Fluxes is a liquid at 20°c with from clear to dark honey, depending of rosin concentration color.
What is MBO No Clean Fluxes used for?
For fluxing in soft soldering process.
What are the hazard statements for MBO No Clean Fluxes?
This substance has 4 hazard statements:
- Irritant for eyes under liquid and vapour form.
- Massive ingestion may cause some digestive troubles (vomiting...), and drunkenness syndrome quite coma and serious complications possible.
- Fume during use.
- Easily flammable product.