Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- illbruck GS200
- Product Code
- TK-I-GS200
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sealant
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Tremco CPG Netherlands B.V.
manufacturer
Vlietskade 1032, 4241 WC Arkel
+31 (0) 183568000
Tremco CPG UK Ltd
distributor
Coupland Road, Hindley Green, Wigan, WN2 4HT
+44 (0) 1942251400
http://www.cpg-europe.com
Emergency Contacts
Emergency Contact
+44 (0) 1942251400
During office hours
NHS
111
Emergency Contact
01 809 2166
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with non-hazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated middle EC: 265-148-2 | 64742-46-7 | 20 - 30% | Yes |
| triacetoxyethylsilane EC: 241-677-4 | 17689-77-9 | 1 - 5% | Yes |
| methylsilanetriyl triacetate EC: 224-221-9 | 4253-34-3 | 1 - 5% | Yes |
| 4,5-dichloro-2-octyl-2H-isothiazol-3-one EC: 264-843-8 | 64359-81-5 | 0.1 - 1% | Yes |
While curing the following substances are formed and released by a reaction with atmospheric humidity: Ethanoic acid
Notes
While curing the following substances are formed and released by a reaction with atmospheric humidity: Ethanoic acid
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Treat affected skin with cotton wool or cellulose. Then wash and rinse thoroughly with water and a mild cleaning agent. If symptoms persist consult doctor.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Do not induce vomiting; call for medical help immediately. Rinse out mouth and then drink plenty of water.
Immediate Medical Attention
Call for medical help immediately.
Medical Treatment
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water haze, Fire-extinguishing powder, Alcohol resistant foam, Carbon dioxide (CO2), Sand
Water with full jet
Ethanoic acid
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow to enter sewers/ surface or ground water.
Pick up mechanically. Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The usual precautionary measures are to be adhered to when handling chemicals.
Store in cool, dry conditions in well sealed receptacles.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. Material of gloves: Butyl rubber, BR (Recommended thickness of the material: ≥ 0.3 mm), Nitrile rubber, NBR (Recommended thickness of the material: ≥ 0.1 mm). Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles.
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Filter ABEK. Use suitable respiratory protective device in case of insufficient ventilation. For further guidance, please refer to HSE HSG53 "Respiratory Protective Equipment at work - A Practical Guide".
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
Keep away from heat.
No further relevant information available.
Ethanoic acid. Beginning at approx. 150 °C small amounts of formaldehyde are formed by an oxidative decomposition.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must be specially treated adhering to official regulations.
Must be specially treated adhering to official regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Void
- Shipping Name
- Void
- Transport Class
- Void
- Packing Group
- Void
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for illbruck GS200?
The signal word is no signal word.
What is the physical form of illbruck GS200?
illbruck GS200 is a pasty appearing as pasty with according to product specification color. It has pungent, makes eyes water odor.
What is the solubility of illbruck GS200?
Insoluble.
What is illbruck GS200 used for?
Sealant
What is the melting point of illbruck GS200?
The melting point is Undetermined. and the boiling point is Undetermined..