Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Liebherr Gear Basic 90 LS
- Product Code
- 18010, 21010
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Motor vehicle lubricant Automotive gear oil
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
LIEBHERR-LOGISTICS GmbH
manufacturer
St. Vitus 1, DE - 88457 Kirchdorf an der Iller
LIEBHERR-COMPONENTS BIBERACH GmbH
manufacturer
Hans-Liebherr-Strasse 45, DE - 88400 Biberach an der Riß
LIEBHERR-WERK BIBERACH GmbH
manufacturer
Memminger Straße 120, DE - 88400 Biberach an der Riß
LIEBHERR-WERK EHINGEN GmbH
manufacturer
Dr.-Hans-Liebherr-Strasse 1, DE - 89584 Ehingen
LIEBHERR-MISCHTECHNIK GmbH
manufacturer
Im Elchgrund 12, DE - 88427 Bad Schussenried
LIEBHERR-MINING EQUIPMENT COLMAR SAS
manufacturer
49 rue Frédéric Hartmann, CS 50038, FR - 68025 Colmar Cedex
LIEBHERR-WERK NENZING GmbH
manufacturer
Dr.-Hans-Liebherr-Strasse 1, AT - 6710 Nenzing
Emergency Contacts
Emergency Contact
+49 7354 80-6060
During working hours (CET)
CHEMTREC
+44 203 807 3798
CHEMTREC
+353 190 146 70
CHEMTREC
+31 858 880 596
CHEMTREC
+61 290 372 994
CHEMTREC
+64 980 10034
CHEMTREC
0800 014 676
CHEMTREC
+1 703 741 5970
CHEMTREC
+91 807 127 9207
CHEMTREC
+1 703 527 3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Amine phosphate EC: 931-384-6 | --- | 0.25 - 2.5% | Yes |
| Alkyl-(C12-14)-aminealkyl-(C14-18)-phosphate EC: 939-591-3 | --- | 2.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Do not induce vomiting; call for medical help immediately.
Immediate Medical Attention
Call for medical help immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO₂, sand, extinguishing powder. Use fire extinguishing methods suitable to surrounding conditions.
Do not use water with full jet.
In case of fire, the following can be released: Nitrogen oxides (NOx), Carbon monoxide (CO), Sulphur oxide (SOx)
Firefighter Protection
Wear self-contained respiratory protective device. Do not inhale explosion gases or combustion gases. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Particular danger of slipping on leaked/spilled product.
Do not allow to enter sewers, surface or ground water. Prevent from spreading (e.g. by damming-in or oil barriers).
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
When handling product in drums use safety footwear and suitable tools. No special precautions are necessary if used correctly.
Store in cool, dry place in tightly closed receptacles.
At work please do not eat, drink or smoke.
Fire class according to EN 2: B
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Wearing protective gloves (EN ISO 374) is recommended. Preventive skin protection by use of skin-protecting agents is recommended. Material of gloves: Nitrile rubber, NBR. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Penetration time of glove material: The exact breakthrough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Goggles recommended during refilling.
No respiratory protection is ordinarily required under normal conditions of use. Select a filter suitable for combined particulate/ gases and organic vapours (boiling point > 65 °C, AP2, EN 14387), if exposure limit is exceeded or when aerosol or mist is formed.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
See 10.2 to 10.6
Reacts with strong oxidising agents.
Avoid contact with heat, sparks, flames and all other sources of ignition.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
No further relevant information available.
12.3 Bioaccumulative potential
No further relevant information available.
12.4 Mobility in soil
The product is not soluble in water and is expected to adsorb to soil particles, resulting in low mobility.
12.5 Results of PBT and vPvB assessment
The substance is not considered PBT or vPvB.
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system. Contact waste processors for recycling information.
Contact waste processors for recycling information.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Liebherr Gear Basic 90 LS?
The signal word is no signal word.
What is the physical form of Liebherr Gear Basic 90 LS?
Liebherr Gear Basic 90 LS is a fluid with brown color. It has mild odor.
What is Liebherr Gear Basic 90 LS used for?
Motor vehicle lubricant Automotive gear oil
What is the melting point of Liebherr Gear Basic 90 LS?
The melting point is Not determined. and the boiling point is Not determined..