Adex-K

If symptomatic, move to fresh air. Get medical attention if symptoms persist.

Symptoms: Dust irritates the respiratory system, and may cause coughing and difficulties in breathing.

Wash area with soap and water. Get medical attention if irritation develops or persists.

Do not rub eyes. Flush thoroughly with water. If irritation occurs, get medical assistance.

Symptoms: Dust in the eyes

Rinse mouth thoroughly with water and give large amounts of milk or water to people not unconscious. Get medical attention if symptoms occur.

No specific measures are required as this product is a fire extinguishing medium.

Not applicable.

Not a fire hazard.

No specific precautions.

For non-emergency personnel: Avoid inhalation of dust and contact with skin and eyes. For emergency responders: Avoid formation of dust. Use personal protection recommended in section 8 of the SDS.

Avoid discharge to the aquatic environment.

Vacuum up the spilled material.

Avoid inhalation of dust and contact with skin and eyes. Wear appropriate personal protective equipment.

Store in original container. Store in a cool, dry, well-ventilated place. Store extinguisher in an upright position not more than three high. Read and follow manufacturer's recommendations.

Wash hands after handling. Observe good industrial hygiene practices.

Provide sufficient ventilation for operations causing dust formation. Observe occupational exposure limits and minimise the risk of exposure.

It is a good industrial hygiene practice to minimise skin contact. For prolonged or repeated skin contact use suitable protective gloves.

Wear approved safety goggles.

In case of inadequate ventilation or risk of inhalation of dust, use suitable respiratory equipment with particle filter (type P2). If engineering controls do not maintain airborne concentrations below recommended exposure limits (where applicable) or to an acceptable level (in countries where exposure limits have not been established), an approved respirator must be worn.

Wear suitable protective clothing. It is a good industrial hygiene practice to minimise skin contact.

Contain spills and prevent releases and observe national regulations on emissions.

Stable under normal temperature conditions.

The product is stable and non reactive under normal conditions of use, storage and transport.

Hazardous polymerisation does not occur.

Temperatures above melting point. Contact with alkalis.

Strong acids. Strong bases. Strong oxidising agents. Alkali metals. Magnesium. Water.

Ammonia. Sulphur oxides. Oxides of phosphorus. Carbon oxides.

Dispose of waste and residues in accordance with local authority requirements.

Dispose of waste and residues in accordance with local authority requirements.