NextSDS Logo
Safety Data Sheet EN

Imtrex XE

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Imtrex XE

Regulatory Identifiers

CAS Number
N/A

Identified Uses

crop protection product, fungicide

Manufacturers & Suppliers

B

BASF SE

manufacturer

67056 Ludwigshafen, GERMANY

+49 621 60-27777

Emergency Contacts

Emergency Contact

+49 180 2273-112

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H332
Eye Irrit. Cat. 2B H320
Repr. H362
STOT SE Cat. 3 H335
Aquatic Acute Cat. 2 H401
Aquatic Chronic Cat. 2 H411

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H320 Causes eye irritation.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
H362 May cause harm to breast-fed children.
H401 Toxic to aquatic life.
H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read carefully and follow all instructions.
P260 Do not breathe dust or mist.
P263 Avoid contact during pregnancy and while nursing.
P264 Wash contaminated body parts thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P271 Use only outdoors or in a well-ventilated area.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P312 Call a POISON CENTER or physician if you feel unwell.
P337 + P313 If eye irritation persists: Get medical attention.
P391 Collect spillage.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents and container to hazardous or special waste collection point.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

crop protection product, fungicide, Emulsifiable concentrate (EC)

Chemical Name CAS Number Concentration Hazardous
1H-Pyrazole-4-carboxamide, 3-(difluoromethyl)-1-methyl-N-(3',4',5'-trifluoro[1, 1'-biphenyl]-2-yl) EC: 620-041-3 907204-31-3 6.33% Yes
Propanoic acid, 2-hydroxy-, 2-ethylhexyl ester, (2S)- EC: 606-097-1 186817-80-1 35% Yes
N,N-Dimethyldecan-1-amide EC: 238-405-1 14433-76-2 25% Yes
Dimethyl adipate EC: 211-020-6 627-93-0 20% Yes
Methyl-Oxirane, Blockpolymer with Oxirane, Monoisotridecyl ether EC: 677-779-4 196823-11-7 20% Yes
Poly(oxy-1,2-ethanediyl), .alpha .- [tris(1-phenylethyl)phenyl] -. omega .- hydroxy- EC: 619-457-8 99734-09-5 10% Yes
benzyl alcohol EC: 202-859-9 100-51-6 10% Yes
solvent naphtha EC: 265-198-5 64742-94-5 5% Yes
Benzenesulfonic acid, mono-C11-13-branched alkyl derivs., calcium salts EC: 273-234-6 68953-96-8 5% Yes
Alcohols, C11-14-iso-, C13-rich, ethoxylated EC: 616-609-5 78330-21-9 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Keep patient calm, remove to fresh air, seek medical attention.

Skin contact

Wash thoroughly with soap and water.

Eye contact

Wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.

Ingestion

Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.

Medical Treatment

Treat according to symptoms (decontamination, vital functions), no known specific antidote.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Suitable chemical resistant safety gloves (EN ISO 374-1) also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN ISO 374-1): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) etc.

Eyes

Safety glasses with side-shields (frame goggles) (e.g. EN 166)

Respiratory

Suitable respiratory protection for lower concentrations or short-term effect: Combination filter for gases/vapours of organic, inorganic, acid inorganic, alkaline compounds and toxic particles (e. g. EN 14387 Type ABEK-P3)

Skin/Body

Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
yellow
Colour Intensity
---
Form
liquid
Odor
moderate odour, acidic
Odor Threshold
Not determined since harmful by inhalation.
Ph
approx. 4 - 6 (CIPAC standard water D, 20 ℃)
Melting Point
---
Boiling Point
---
Flash Point
109 °℃ (Directive 92/69/EEC, A.9)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
approx. 2,7 hPa (20 ℃)
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
approx. 0,99 g/cm3 (20 ℃)
Flammability
not explosive
Upper Explosive Limit
As a result of our experience with this product and our knowledge of its composition we do not expect any hazard as long as the product is used appropriately and in accordance with the intended use.
Lower Explosive Limit
As a result of our experience with this product and our knowledge of its composition we do not expect any hazard as long as the product is used appropriately and in accordance with the intended use.
Explosive Limits
---
Auto Ignition Temperature
250 ℃ (Directive 92/69/EEC, A.15)
Decomposition Temperature
150 ℃, 20 KJ/kg (DSC (DIN 51007)) (onset temperature) Not a substance liable to self-decomposition according to UN transport regulations, class 4.1.
Solubility
emulsifiable
Partition Coefficient
not applicable
Solubility In Water
emulsifiable
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
approx. 13 mPa.s (20 ℃, 10 1/s)
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3082
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (FLUXAPYROXAD)
Transport Class
9, EHSM
Packing Group
III
ADR

None known

IMDG

EmS: F-A; S-F

IATA

None known

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Imtrex XE?

The signal word is warning.

What is the physical form of Imtrex XE?

Imtrex XE is a liquid with yellow color. It has moderate odour, acidic odor.

What is the solubility of Imtrex XE?

emulsifiable

What is Imtrex XE used for?

crop protection product, fungicide

What are the hazard statements for Imtrex XE?

This substance has 6 hazard statements:

  • H320: Causes eye irritation.
  • H332: Harmful if inhaled.
  • H335: May cause respiratory irritation.
  • H362: May cause harm to breast-fed children.
  • H401: Toxic to aquatic life.
  • H411: Toxic to aquatic life with long lasting effects.

Compliance Scanner

Scan your compliance