Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 2K-DC LACK DTM HYDRO RAL 7037
- Product Code
- PD795B703700
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Dr. Demuth Derisol Lackfarben GmbH & Co. KG
manufacturer
Hillerser Str. 8, 37154 Northeim, Germany
http://www.dr-demuth.com
Emergency Contacts
Emergency Contact
+49555197940
Only available during office hours.
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. In case of irregular breathing or respiratory arrest provide artificial respiration.
Remove contaminated, saturated clothing immediately. After contact with skin, wash immediately with plenty of water and soap. Do not use solvents or thinners.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical advice immediately.
If swallowed, rinse mouth with water (only if the person is conscious). Seek medical advice immediately. Keep victim calm. Do NOT induce vomiting.
Medical Treatment
First Aid, decontamination, treatment of symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
alcohol resistant foam, Carbon dioxide (CO2), Powder, spray mist, (water)
Strong water jet
Dense black smoke occurs during fire. Inhaling hazardous decomposing products can cause serious health damage.
Cool closed containers that are near the source of the fire.
Firefighter Protection
Provide a conveniently located respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate affected area. Do not breathe vapours.
Do not allow to enter into surface water or drains.
Clean using cleansing agents. Do not use solvents.
Materials: cleansing agents
Related Products
Similar products with comparable safety profiles
2K-DC LACK DTM HYDRO RAL 5009
---
MOTIP HYBRID COLORS WHITE RAL 9010 400 ML
---
2k pur monolayer doosan dark grey
---
DIRKO™ HT Grey
---
INTERTHANE 990 RAL7001 SILVER GREY PT A
---
2K PU Finition Orange Doosan
---
COLORMATCH 700 BLACK
---
Interzone 954 RAL7035 Light Grey Pt A
UFI: VC01-H062-P00X-489R
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin, eyes and clothes. Avoid respiration of swarf. Personal protection equipment: see section 8 Do not empty containers with pressure - no pressure vessel! Always keep in containers that correspond to the material of the original container. Follow the legal protection and safety regulations.
Storage in accordance with the Ordinance on Industrial Safety and Health (BetrSiVO). Keep container tightly closed. Do not empty containers with pressure - no pressure vessel! Smoking is forbidden. Access only for authorised persons. Store carefully closed containers upright to prevent any leaks.
When using do not eat, drink or smoke.
Smoking is forbidden.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide good ventilation. This can be achieved with local or room suction.
For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Observe the instructions and details for use, storage, maintenance and replacement provided by the protective glove manufacturer. Penetration time of glove material depending on intensity and duration of exposure to skin. Recommended glove articles: EN ISO 374
Eye glasses with side protection: EN 166
In case of inadequate ventilation wear respiratory protection.
Barrier creams can help protecting exposed skin areas. In no case should they be used after contact. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn. Antistatic clothing including shoes are recommended.
Do not allow to enter into surface water or drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable when applying the recommended regulations for storage and handling. Further information on correct storage: refer to section 7.
No specific test data related to reactivity available for this product or its ingredients.
Keep away from strong acids, strong bases and strong oxidizing agents to avoid exothermic reactions.
exposure to high temperatures
No further relevant information available.
Hazardous decomposition byproducts may form with exposure to high temperatures e.g.: Carbon dioxide (CO2), Carbon monoxide, smoke.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 2K-DC LACK DTM HYDRO RAL 7037?
The signal word is no signal word.
What is the physical form of 2K-DC LACK DTM HYDRO RAL 7037?
2K-DC LACK DTM HYDRO RAL 7037 is a liquid with grey color. It has characteristic odor.
What is the melting point of 2K-DC LACK DTM HYDRO RAL 7037?
The melting point is < -85 °C and the boiling point is > 35 °C.