NextSDS Logo
Safety Data Sheet EN

SUBERIC ACID (2,2,7,7-D4, 98%)

CAS 19031-57-3
EC 208-010-9 (Unlabeled)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SUBERIC ACID (2,2,7,7-D4, 98%)
Product Form
Substance
Product Code
DLM-6143
Chemical Name
SUBERIC ACID (2,2,7,7-D4, 98%)
Synonyms
Octanedioic acid

Regulatory Identifiers

CAS Number
19031-57-3 Check regulations →
EC Number
208-010-9 (Unlabeled) Check regulations →

Identified Uses

Professional use

Manufacturers & Suppliers

Cambridge Isotope Laboratories, Inc. logo

Cambridge Isotope Laboratories, Inc.

manufacturer

50 Frontage Road, Andover, MA 01810, USA

1-800-322-1174

http://www.isotope.com

Emergency Contacts

Chemtrec

1-800-424-9300

24 hours

International

1-703-741-5970

24 hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H335

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation

Precautionary Statements

P261 Avoid breathing dust, vapors, mist, gas
P264 Wash hands, forearms and face thoroughly after handling
P271 Use only outdoors or in a well-ventilated area
P280 Wear protective clothing, protective gloves
P302 + P352 IF ON SKIN: Wash with plenty of water
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
P312 Call a doctor if you feel unwell
P321 Specific treatment (see Hazardous component(s) for labeling on this label)
P332 + P313 If skin irritation occurs: Get medical advice/attention
P337 + P313 If eye irritation persists: Get medical advice/attention
P362 + P364 Take off contaminated clothing and wash it before reuse
P403 + P233 Store in a well-ventilated place. Keep container tightly closed
P405 Store locked up
P501 Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
SUBERIC ACID (2,2,7,7-D4, 98%) 19031-57-3 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

When symptoms occur: go into open air and ventilate suspected area. If not breathing, give artificial respiration. Get medical advice/attention.

Symptoms: May be harmful if inhaled. May cause respiratory irritation.

Skin contact

Wash with plenty of soap and water. Get immediate medical advice/attention.

Symptoms: Causes skin irritation. Harmful in contact with skin.

Eye contact

Rinse cautiously with water for several minutes.

Symptoms: Causes serious eye irritation.

Ingestion

Never give anything by mouth to an unconscious person. Rinse mouth out with water. Get medical advice/attention.

Symptoms: May be harmful if swallowed.

Immediate Medical Attention

Get immediate medical advice/attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray. dry chemical powder, alcohol-resistant foam, carbon dioxide (CO2).

Instructions

Fight fire with normal precautions from a reasonable distance. Wear a self contained breathing apparatus. Do not enter fire area without proper protective equipment, including respiratory protection.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection. Wear recommended personal protective equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid dust formation. Use personal protective equipment as required. Ensure adequate air ventilation. Avoid breathing dust, vapors, mist, gas.

Environmental

Prevent entry to sewers and public waters. Do not allow to enter drains or water courses. Avoid release to the environment.

Cleanup methods

This material and its container must be disposed of in a safe way, and as per local legislation.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Provide adequate ventilation to minimize dust and/or vapor concentrations.

Storage

Store at room temperature away from light and moisture.

Hygiene

Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Wear suitable protective clothing and gloves.

Eyes

Wear eye protection. Chemical goggles or face shield with safety glasses.

Respiratory

In case of inadequate ventilation wear respiratory protection. Approved supplied air respirator.

Skin/Body

Wear suitable protective clothing, gloves and eye/face protection.

Environmental

Avoid release to the environment.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Voc Content
---
Density
---
Molecular Weight
178.22 g/mol
Explosive Limits
---
Physical State
Solid
Form
Powder.
Colour
White to off-white.
Melting Point
140 - 144 °C (284 - 291 °F)
Properties Status
---
Appearance
Powder.
Dynamic Viscosity
No data available
Physical State Data
solid
Relative Evaporation Rate
No data available
Evaporation Rate
No data available
Odor Threshold
No data available
Ph
No data available
Freezing Point
No data available
Lower Explosive Limit
No data available
Kinematic Viscosity
No data available
Softening Point
---
Auto Ignition Temperature
No data available
Vapor Density
---
Solubility In Fat
---
Flash Point
210 °C (410 °F)
Solidification Point
---
Decomposition Temperature
No data available
Boiling Point
230 °C (446 °F)
Upper Explosive Limit
No data available
Colour Intensity
---
State Under Standard Conditions
---
Flammability
No data available
Relative Density
No data available
Vapor Pressure
No data available
Bulk Density
---
Odor
No data available.
Solubility In Water
---
Cloud Point
---
Crystallisation Point
---
Metal Corrosion
---
Partition Coefficient
No data available
Solubility
No data available
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable if stored under recommended conditions.

Reactivity

No additional information available

Hazardous reactions

No additional information available

Avoid

No additional information available

Incompatible

Strong oxidizing agents.

Decomposition

Carbon oxides (CO, CO2).

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material.

Disposal

Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not applicable
Shipping Name
Not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is SUBERIC ACID (2,2,7,7-D4, 98%) known by?

SUBERIC ACID (2,2,7,7-D4, 98%) is also known as: Octanedioic acid

What is the hazard signal word for SUBERIC ACID (2,2,7,7-D4, 98%)?

The signal word is warning.

What is the physical form of SUBERIC ACID (2,2,7,7-D4, 98%)?

SUBERIC ACID (2,2,7,7-D4, 98%) is a solid appearing as powder. with white to off-white. color. It has no data available. odor.

What is the solubility of SUBERIC ACID (2,2,7,7-D4, 98%)?

No data available

What is SUBERIC ACID (2,2,7,7-D4, 98%) used for?

Professional use

What are the hazard statements for SUBERIC ACID (2,2,7,7-D4, 98%)?

This substance has 3 hazard statements:

  • H315: Causes skin irritation
  • H319: Causes serious eye irritation
  • H335: May cause respiratory irritation

What is the melting point of SUBERIC ACID (2,2,7,7-D4, 98%)?

The melting point is 140 - 144 °C (284 - 291 °F) and the boiling point is 230 °C (446 °F).