Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Super glue – The original
- Product Code
- 1733 0100, 1733 0050
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesives, sealants
Uses advised against
No information available.
Manufacturers & Suppliers
Renfert GmbH
manufacturer
Untere Giesswiesen 2, D-78247 Hilzingen
+49 7731 8208-0
http://www.renfert.com
Emergency Contacts
Healthcare Professionals
01 809 2566
Health and Safety Executive (HSE) Chemicals
0044 151 951 3317
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Cyanoacrylate containing adhesive.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ethyl 2-cyanoacrylate EC: 230-391-5 | 7085-85-0 | 50 - 100% | Yes |
| 2-Propenoic acid, 2-methyl-, methyl ester, polymer with methyl 2-propenoate EC: 618-476-9 | 9011-87-4 | 10% | Yes |
| Bis(2-ethylhexyl)maleate EC: 205-524-5 | 142-16-5 | 1% | Yes |
| 1,4-dihydroxybenzene EC: 204-617-8 | 123-31-9 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. In case of respiratory tract irritation, consult a physician.
Symptoms: respiratory tract irritation
IF ON SKIN: Wash with plenty of soap and water.
Symptoms: skin irritation
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Symptoms: eye irritation
Call a physician immediately.
Immediate Medical Attention
Call a physician immediately (after ingestion). In case of respiratory tract irritation, consult a physician. In case of eye irritation consult an ophthalmologist. If skin irritation occurs: Get medical advice/attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguishing powder, Carbon dioxide (CO2), alcohol resistant foam, Water spray jet
Full water jet
Thermal decomposition can lead to the escape of irritating gases and vapours.
Do not inhale explosion and combustion gases.
Firefighter Protection
Do not inhale explosion and combustion gases.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection equipment.
Do not allow to enter into surface water or drains.
Absorb with liquid-binding material. Take up mechanically.
Materials: liquid-binding material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle and open container with care. Use only in well-ventilated areas. Avoid contact with eyes and skin. Do not eat, drink or smoke when using this product.
Keep only in the original container in a cool, well-ventilated place. Keep container tightly closed. Protect against: Heat, UV-radiation/sunlight. Keep the packing dry and well sealed to prevent contamination and absorption of humidity.
Do not breathe vapour. Avoid contact with skin, eyes and clothes. Wash hands before breaks and after work. Keep away from food, drink and animal feedingstuffs.
No special fire protection measures are necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Safe handling: see section 7
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. Suitable material: NBR (Nitrile rubber) Thickness of the glove material: 0,5 mm Breakthrough time: > 30 min For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Wear eye/face protection.
If handled uncovered, arrangements with local exhaust ventilation should be used if possible. Respiratory protection necessary at: insufficient ventilation
Do not allow to enter into surface water or drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under recommended conditions of storage, use and temperature.
No hazardous reaction when handled and stored according to provisions.
Violent reaction with: Alcohols, Amines, Alkali (lye), Acid, Water
Keep the packing dry and well sealed to prevent contamination and absorption of humidity.
No information available.
No known hazardous decomposition products.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
There are no data available on the mixture itself.
12.2. Persistence and degradability
There are no data available on the mixture itself.
12.3. Bioaccumulative potential
No indication of bioaccumulation potential.
12.4. Mobility in soil
No data available on the mixture itself.
12.5. Results of PBT and vPvB assessment
The substances in the mixture do not meet the PBT/vPvB criteria according to REACH, annex XIII.
12.6. Endocrine disrupting properties
The product does not contain any substances with endocrine disrupting properties as no components meet the criteria.
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste according to applicable legislation.
The allocation of waste identity numbers/waste descriptions must be carried out according to the EEC, specific to the industry and process.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Super glue – The original?
The signal word is warning.
What is the physical form of Super glue – The original?
Super glue – The original is a liquid with colourless color. It has characteristic odor.
What is Super glue – The original used for?
Adhesives, sealants
What are the hazard statements for Super glue – The original?
This substance has 4 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Super glue – The original?
The melting point is not determined and the boiling point is 60 C.