Papanicolaou's solution 3a polychromatic solution EA 31 for cytological cancer and cycle diagnosis

Move to fresh air. Immediately call in physician. If breathing stops: immediately apply artificial respiration, if necessary also oxygen.

Wash off with plenty of water. Remove contaminated clothing. Consult a physician.

Rinse out with plenty of water with the eyelid held wide open. Call in ophthalmologist if necessary.

Move to fresh air. Make victim drink ethanol (e.g. 1 drinking glass of a 40% alcoholic beverage). Call a doctor immediately (mention methanol ingestion). Only in exceptional cases, if no medical care is available within one hour, induce vomiting (only in fully conscious persons) and make victim drink ethanol again (approx. 0.3 ml of a 40% alcoholic beverage/kg body weight/hour).

Carbon dioxide (CO2), Foam, Dry powder

For this substance/mixture no limitations of extinguishing agents are given.

Combustible. Vapours are heavier than air and may spread along floors. Forms explosive mixtures with air at ambient temperatures. Pay attention to flashback. Development of hazardous combustion gases or vapours possible in the event of fire.

Remove container from danger zone and cool with water. Suppress (knock down) gases/vapours/mists with a water spray jet.

Do not breathe vapours, aerosols. Avoid substance contact. Ensure adequate ventilation. Keep away from heat and sources of ignition. Evacuate the danger area, observe emergency procedures, consult an expert.

Do not let product enter drains. Risk of explosion.

Take up with liquid-absorbent and neutralising material (e.g. Chemizorb® H⁺, Merck Art. No. 101595).

Materials: liquid-absorbent and neutralising material (e.g. Chemizorb® H⁺, Merck Art. No. 101595)

Work under hood. Do not inhale substance/mixture. Avoid generation of vapours/aerosols. Observe label precautions.

Keep container tightly closed in a dry and well-ventilated place. Keep locked up or in an area accessible only to qualified or authorised persons.

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

Keep away from open flames, hot surfaces and sources of ignition.

Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.

full contact: Glove material: butyl-rubber Glove thickness: 0,7 mm Break through time: - 480 min splash contact: Glove material: Viton (R) Glove thickness: 0,70 mm Break through time: - 120 min The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 898 Butoject (full contact), KCL 890 Vitoject (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g., KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Safety glasses

required when vapours/aerosols are generated. Recommended Filter type: filter ABEK The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Flame retardant antistatic protective clothing

Do not let product enter drains. Risk of explosion.

The product is chemically stable under standard ambient conditions (room temperature).

Vapours may form explosive mixture with air.

Risk of explosion with: chromium(VI) oxide, hydrogen peroxide, uranium hexafluoride, nitrogen dioxide, Nitric acid, Oxides of phosphorus, permanganic acid, perchloric acid, perchlorates, Fluorine, Ethylene oxide, chromyl chloride, halogen-halogen compounds, Strong oxidizing agents, alkali oxides, Alkaline earth metals, Alkali metals, potassium permanganate, sulphuric acid. Risk of ignition or formation of inflammable gases or vapours with: chromium(VI) oxide, hydrogen peroxide, uranium hexafluoride, nitrogen dioxide, Nitric acid, Oxides of phosphorus, permanganic acid, perchloric acid, perchlorates, Fluorine, Ethylene oxide, chromyl chloride, halogen-halogen compounds, Strong oxidizing agents, alkali oxides, Alkaline earth metals, Alkali metals, potassium permanganate, sulphuric acid.

Warming. A range from approx. 15 Kelvin below the flash point is to be rated as critical.

chromium(VI) oxide, hydrogen peroxide, uranium hexafluoride, nitrogen dioxide, Nitric acid, Oxides of phosphorus, permanganic acid, perchloric acid, perchlorates, Fluorine, Ethylene oxide, chromyl chloride, halogen-halogen compounds, Strong oxidizing agents, alkali oxides, Alkaline earth metals, Alkali metals, potassium permanganate, sulphuric acid

no information available

See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions.