Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PATTERN_RESIN_LS_Powder
- Product Form
- Powder
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Auxiliary for dental technology
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
GC EUROPE N.V.
manufacturer
Interleuvenlaan 33, B-3001 Leuven
+32/(0)16/74.10.00
Emergency Contacts
ChemTel Inc.
+01-813-248-0585
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Only substances required to be mentioned according to Annex II of regulation 1907/2006 are listed. Information on the other substances that may be present can be obtained upon request.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Dibenzoyl peroxide | 94-36-0 | 0.2 - 0.5% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. Take affected persons into fresh air and keep quiet.
If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Rinse out mouth and then drink plenty of water. If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire fighting measures that suit the environment.
Water with full jet
Formation of toxic gases is possible during heating or in case of fire.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons from danger area.
Do not allow product to reach sewage system or any water course. Do not allow to penetrate the ground/soil.
Pick up mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent formation of dust. Any deposit of dust which cannot be avoided must be regularly removed.
Store only in unopened original receptacles.
Dust can combine with air to form an explosive mixture.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses
Suitable respiratory protective device recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No further relevant information available regarding aquatic toxicity.
12.2 Persistence and degradability
No further relevant information available.
12.3 Bioaccumulative potential
No further relevant information available.
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
12.6 Endocrine disrupting properties
The product does not contain substances with endocrine disrupting properties.
12.7 Other adverse effects
The substance is classified as extremely hazardous for water (Water hazard class 3).
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Must not be disposed of together with household garbage.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PATTERN_RESIN_LS_Powder?
The signal word is no signal word.
What is the physical form of PATTERN_RESIN_LS_Powder?
PATTERN_RESIN_LS_Powder is a solid with red color. It has odorless odor.
What is PATTERN_RESIN_LS_Powder used for?
Auxiliary for dental technology
What is the melting point of PATTERN_RESIN_LS_Powder?
The melting point is Undetermined. and the boiling point is Undetermined..