Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SERODIA-MYCO II, SAMPLE DILUENT
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory use. For product use see insert.
Uses advised against
Not to be used for any purpose other than those mentioned below.
Manufacturers & Suppliers
Fujirebio INC.
manufacturer
2-1-1 Nishishinjuku, Shinjuku-ku, Tokyo 163-0410, Japan
+81-3-6279-0899
Fujirebio Europe N.V.
+32-9-329.13.29
FUJIREBIO INC.
global supplier
+81-3-6279-0899
FUJIREBIO EUROPE
regional supplier
Technologiepark 6, 9052 Gent, Belgium
+32-9-329-13-29
Emergency Contacts
FUJIREBIO INC. (Japan) Global Sales Department
+81-3-6279-0899
Mon - Fri 9:00am to 5:30pm (JST)
FUJIREBIO EUROPE
+32-9-329-13-29
Mon - Fri 9:00am to 5:30pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Preparation
Notes
Does not contain any dangerous substance within the sense of Regulation (EC) No. 1272/2008 in a separate concentration above or equal to 1 percent by weight.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Do not induce vomiting; call for medical help immediately.
Immediate Medical Attention
call for medical help immediately
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray. Use fire extinguishing methods suitable to surrounding conditions.
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away. See section 8 (Measurements for the control of exposure / personal protection).
No special measures required.
No special measures required.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special precautions are necessary if used correctly.
Store in a dry and well-ventilated area in the closed original packaging. Respect the expiry date and the additional instruction given in the package insert.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear protective gloves in order to be protected against chemical risks according to EN 420 and EN 374-1. Material of gloves: Gloves made of latex, nitrile or PVC may be used. Penetration time of glove material: As the product is a preparation consisting of different substances, no specific information can be given about breakthrough times. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Wear safety glasses in order to protect your eyes against chemical splashes according to EN 166.
Not necessary if room is well-ventilated.
Wear a laboratory coat for your protection against chemical splashes according to EN 340 and EN 369.
Comply with the current local and national environmental regulations.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No further relevant information available.
No further relevant information available.
Production of highly poisonous gases/vapours in contact with acids. Reacts with various metals.
No decomposition if used according to specifications.
Production of explosive azides in contact with lead, copper and zinc.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SERODIA-MYCO II, SAMPLE DILUENT?
The signal word is no signal word.
What is the physical form of SERODIA-MYCO II, SAMPLE DILUENT?
SERODIA-MYCO II, SAMPLE DILUENT is a liquid with light yellow color. It has odourless odor.
What is SERODIA-MYCO II, SAMPLE DILUENT used for?
Laboratory use. For product use see insert.
What is the melting point of SERODIA-MYCO II, SAMPLE DILUENT?
The melting point is Undetermined. and the boiling point is Undetermined..