Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Inhibin B Gen II Calibrator A / Sample Diluent
- Product Code
- A81304
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For In Vitro Diagnostic Use.
Manufacturers & Suppliers
Beckman Coulter, Inc.
manufacturer
250 S. Kraemer Blvd Brea, CA 92821, U.S.A.
800-854-3633
Beckman Coulter Canada LP
national supplier
7075 Financial Drive, Mississauga, ON L5N 6V8, Canada
1-800-463-7828
Beckman Coulter Australia Pty Ltd
national supplier
23-27 Chaplin Drive, Lane Cove NSW 2066, Australia
Beckman Coulter (UK) Ltd.
national supplier
Amersham Place, Little Chalfont, Buckinghamshire, United Kingdom, HP7 9NA
01494 441181
Beckman Coulter Eurocenter SA
national supplier
22, rue Juste-Olivier, Case Postale, 1044, CH-1260 Nyon 1, Switzerland.
+41 (0)22 365 36 11
Beckman Coulter NZ
national supplier
Unit J, 33 Walmsley Road, Otahuhu, Auckland 1062, New Zealand
BCKman Coulter Ireland Inc.
national supplier
Lismeehan, O'Callaghan's Mills, Co. Clare, Ireland
353 (0)65 6831100
Beckman Coulter AB
national supplier
Ekbacksvagen 28, 168 69 Bromma, Sweden
+46 80564 85 900
Cherubino Ltd
distributor
DELF Building, Sliema Road, Gzira, GZR 1637, Malta
+356 21343270
Emergency Contacts
Chemtrec
800-424-9300
24H
Chemtrec
(001) 703-527-3887
24H
Poison Centre
1-844-764-7669
Centre antipoison du Québec
1-800-463-5060
Emergency Contact
999
National Poisons Information Centre
+353 (01) 809 2166
8:00 am to 10:00 pm 7 days a week
National Poisons Information Centre
+353 (01) 809 2566
24 hour service
Emergency Contact
1800 060 881
24 Hour
Emergency Contact
0800 446 109
24 Hour
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| reaction mass of: 5-chloro-2-methyl-4-isothiazolin -3-one [EC# 247-500-7] and 2-methyl-4-isothiazolin-3-one [EC# 220-239-6](3:1) | 55965-84-9 | 0.05% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If product is inhaled, move exposed individual to fresh air. If individual is not breathing, begin artificial respiration by trained personnel and obtain medical attention immediately.
In case of skin contact, rinse with water as a precaution.
If product enters eyes, rinse eyes gently with water as a precaution.
If product is ingested, rinse mouth with water. If irritation or discomfort occurs, obtain medical attention immediately.
Immediate Medical Attention
Obtain medical attention immediately if individual is not breathing (inhalation) or if irritation or discomfort occurs (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
In case of fire use carbon dioxide (CO2), dry chemical, water spray or foam. For large fires use extinguishing media suitable for surrounding fire.
No special hazards determined.
Firefighter Protection
Self-contained breathing apparatus is recommended for firefighters in all chemical fire situations.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Observe general safety guidelines for protection during clean up procedures.
Contain spill to prevent migration.
treat spilled material with a 1:10 bleach/water solution. Absorb liquid and place in container suitable for disposal. Avoid generation of aerosols during clean up.
Materials: 1:10 bleach/water solution
Related Products
Similar products with comparable safety profiles
AMH Gen II Assay Buffer Kit
---
ISE Diluent Gen.2
---
AMH Gen II Calibrator A
---
ClinCal® Serum Calibrator Set, lyophil., for Methylmalonic Acid, Level 0 - 3
---
SERODIA-MYCO II, SAMPLE DILUENT
---
HSV 1 & 2 Sample Dilution Buffer
---
Antibody Diluent
---
ClinCal® Serum Calibrator Set, lyophil., for Trace Elements, Level 1 - 4
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
This product should be handled as though capable of transmitting infectious diseases. Universal precautions should be followed when using this product.
Store below -20°C. To maintain product quality, store according to the instructions in the product labeling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special engineering controls are required. Use with good general ventilation.
Wear impervious gloves such as Nitrile or equivalent. Refer to U.S. OSHA 29 CFR 1910.138, European Standard EN 374 or appropriate government standards.
Safety glasses or chemical goggles should be worn to prevent eye contact. Refer U.S. OSHA 29 CFR 1910.133, European Standard EN166 or appropriate government standards.
Under normal conditions, the use of this product should not require respiratory protection. If overexposure should occur and ventilation is not adequate to maintain airborne concentrations at acceptable levels, the use of respiratory protection should be evaluated by a qualified professional.
Wear protective clothing. Refer to U.S. OSHA 29 CFR 1910.138, European Standard EN 14605:2005+A1:2009 or appropriate government standards.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable in accordance with recommended storage conditions.
No further relevant information available.
No further relevant information available.
Avoid exposure to heat and direct sunlight.
strong acids, strong bases, strong oxidizers
No decomposition products posing significant hazards would be expected from this product (an aqueous solution).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No ecological toxicity information is available for the tested species.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Persistence and degradability
Not determined for the product.
Bioaccumulative potential
Not determined for the product.
Mobility in soil
12.5 Results of PBT and vPvB assessment
The PBT and vPvB assessment has not been determined for the product; PBT and vPvB are considered not applicable.
12.6 Endocrine disrupting properties
The product does not contain substances with endocrine-disrupting properties for the environment according to REACH Article 57(f).
12.7 Other adverse effects
The product contains environmentally hazardous substances below the cutoff level. Prevent release into the environment.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Chemical residues and remains should be routinely handled as special waste. This must be disposed of in compliance with anti-pollution and other laws of the country concerned.
Dispose of as potentially biohazardous waste and in compliance with anti-pollution and other laws of the country concerned. To ensure compliance we recommend that you contact the relevant (local) authorities and/or and approved waste-disposal company for information.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This SDS complies with EC Regulations 1907/2006 (REACH) and amendments.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Inhibin B Gen II Calibrator A / Sample Diluent?
The signal word is warning.
What is the physical form of Inhibin B Gen II Calibrator A / Sample Diluent?
Inhibin B Gen II Calibrator A / Sample Diluent is a liquid with light brown color. It has odorless odor.
What is Inhibin B Gen II Calibrator A / Sample Diluent used for?
For In Vitro Diagnostic Use.
What are the hazard statements for Inhibin B Gen II Calibrator A / Sample Diluent?
This substance has 1 hazard statement:
- H317: May cause an allergic skin reaction.