Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Internal Standard
- Product Code
- 2024
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
In vitro diagnostics, PC21 Laboratory chemicals, PROC15 Use as laboratory reagent
Manufacturers & Suppliers
Chromsystems Instruments & Chemicals GmbH
manufacturer
Am Haag 12, 82166 Gräfelfing, Germany
+49 89 18930-0
http://www.chromsystems.com
Emergency Contacts
advisory service
+49 30 19240
DE, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Aqueous solution
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| hydrogen chloride EC: 231-595-7 | 7647-01-0 | 1 - 2.5% | Yes |
For the wording of the listed risk phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air.
Rinse with water.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Rinse out mouth and then drink plenty of water. If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The product itself is non-combustible. Use fire extinguishing methods suitable to surrounding conditions.
In case of fire, the following can be released: Hydrogen chloride (HCl)
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material (sand, diatomite, universal binders). Dispose of the material collected according to regulations.
Materials: sand, diatomite, universal binders
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special measures required.
Store at +2 to +8 °C.
The product is not flammable.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Additional information about design of technical facilities: No further data; see item 7.
Protective gloves. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374. For the permanent contact gloves made of the following materials are suitable: Nitrile rubber, NBR. Recommended thickness of the material: ≥ 0.11 mm. Penetration time: > 480 min. As protection from splashes gloves made of the following materials are suitable: Nitrile rubber, NBR. Recommended thickness of the material: ≥ 0.11 mm. Penetration time: > 480 min.
Tightly sealed goggles
Use suitable respiratory protective device only when aerosol or mist is formed. Filter A/P2
Light weight protective clothing
Do not empty into drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
Corrosive in contact with metals
Reacts with metals forming hydrogen.
No further relevant information available.
Metals
Hydrogen chloride (HCl)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system. Product residues are to be disposed of in compliance with Directive 2008/98/EC on Waste and national and local requirements, e.g. in a suitable incineration plant.
Leave chemicals in original containers. Transfer small quantities to approved transport containers.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1789
- Shipping Name
- HYDROCHLORIC ACID, solution
- Transport Class
- 8
- Packing Group
- III
Warning: Corrosive substances.
Warning: Corrosive substances.
Warning: Corrosive substances.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No further relevant information available.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Internal Standard?
The signal word is warning.
What is the physical form of Internal Standard?
Internal Standard is a fluid appearing as form: fluid, colour: colourless with colourless color. It has odourless odor.
What is the solubility of Internal Standard?
Fully miscible.
What is Internal Standard used for?
In vitro diagnostics, PC21 Laboratory chemicals, PROC15 Use as laboratory reagent
What are the hazard statements for Internal Standard?
This substance has 1 hazard statement:
- H290: May be corrosive to metals.
What is the melting point of Internal Standard?
The melting point is Undetermined. and the boiling point is Undetermined..