Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Positive Control / Internal Control / Standard
- Product Code
- Ref. CTRxxx, M800xxx, CTRDxx, CTRD01-II, CTRD01-V, CTRGxx, CTRxxxMR, CTRTxxMR, CTRxxxPLD, CTRxxxING, CTRDxxING, CTRGxxPLDxxx, CTRxxxPLD-R, CTRCPE, IC500, STDxxx, STDxxxMR, STDG07xxx, STDxxxPLD, STDG07PLDxxx, STDxxxING, CPExxxING
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Product for in vitro diagnostics.
Uses advised against
recommended use are listed above; other uses are not recommended unless an assessment has provided that risks are controlled.
Manufacturers & Suppliers
ELITechGroup S.p.A.
manufacturer
Corso Svizzera, 185, 10149 – Torino – Italy
+39 011 97.61.91
Emergency Contacts
Emergency Contact
+39 011 97.61.91
Monday – Friday; 8:30-13; 14:00-17:30
IT
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The mixture does not contain substances hazardous to health or the environment or for which there are exposure limits national and / or EU recognized in the workplace, in accordance with Regulation (EC) No. 1272/2008, as amended and Directive 67/548/EEC and subsequent amendments.
First Aid Measures
Emergency procedures for chemical exposure incidents
Ventilate the area or move victim to fresh air. If symptoms persist consult doctor.
Flush with running water or eventually soap areas of the body that have come in contact with the product, if easily feasible for 5 - 10 minutes.
Rinse immediately with plenty of water holding the eyelids open. If symptoms persist, consult a doctor.
Rinse mouth with water without swallowing. If pain persists see a doctor.
Immediate Medical Attention
If symptoms persist, consult a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water, carbon dioxide (CO2), foam or chemicals powders to extinguish the fire depending on the materials involved in the fire.
None in particular.
Avoid breathing fumes.
Firefighter Protection
Use protection for the airways, when exposed to fumes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Limit leakages with ground or sand.
Recover the product for disposal. Eventually absorb it with inert material.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Positive Control/Internal Control/Standard
---
Positive Control/Internal Control/Standard
---
ISE Internal Standard Gen.2
---
IC2-M13 Internal Control - EU
---
Internal Standard
---
Rapid fFN Level 1 / Negative Control, Rapid fFN Level 2 / Positive Control
---
HSV 1 & 2 Positive Control
---
G-6-PDH NORMAL Control (G-6-PDH CONTROL N)
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Give adequate ventilation to the areas where the product is handled.
Use latex or vinyl gloves. Duration of the glove material: normal wear and tear.
Not necessary for normal use. Operate however according to good working practices and safety glasses with side protection.
Handle in a chemical hood if hot worked.
Not necessary for normal use. Operate however according to good working practices and laboratory coats.
Adopt good working practices, avoiding release into the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Stable at normal conditions.
Possibility of hazardous exothermic reaction: No. Consequences for security for physical changes: No. Unstable products as a result of degradation: No.
None in particular.
None in particular. However, it should avoid violent mixing in strong bases.
Decomposing emits fumes of COx, NH₃, HCl, NOx.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Positive Control / Internal Control / Standard?
The signal word is no signal word.
What is the physical form of Positive Control / Internal Control / Standard?
Positive Control / Internal Control / Standard is a liquid appearing as liquid, colourless with colourless color. It has odorless odor.
What is Positive Control / Internal Control / Standard used for?
Product for in vitro diagnostics.
What is the melting point of Positive Control / Internal Control / Standard?
The melting point is N.D. and the boiling point is > 100°C at 100.000 Pa.