Positive Control/Internal Control/Standard

Remove person to fresh air and keep comfortable for breathing. If breathing is difficult, give oxygen. Get medical advice in case of illness.

Remove contaminated clothing and shoes. Wash affected area with large amount of water and soap until no evidence of substance remains (15-20 minutes). Get medical advice if irritation develops and persists.

Wash immediately with plenty of water or normal saline for at least 15 minutes. Keep eyelid open with the finger. Get medical advice if adverse symptoms appear.

If swallowed rinse mouth with plenty of water provided person is conscious. Do not induce vomiting. Get medical advice if adverse symptoms appear.

Carbon dioxide. Foam. Dry powder.

None in particular.

Cool the containers with jet water, even after the fire is extinguished. Remove the containers from the fire area if this can be done safely.

Ventilate spillage area. Evacuate area. Remove all sources of ignition. Evacuate unnecessary personnel.

Avoid release to the environment.

Collect spilled material in containers. Where appropriate, moisten to prevent the dispersion of dust, absorb with inert materials and wash the area with plenty of water.

Materials: inert materials

Ensure good ventilation of the work station. Take all necessary technical measures to avoid or minimize the release of the product on the workplace. Wear appropriate personal protective equipment (see section 8).

Keep containers tightly closed and labelled with the name of the product. Avoid environmental release. Keep away from food and drinks. Store in a well-ventilated place. Keep cool.

Do not eat, drink or smoke when using this product. Always wash hands after handling the product. Remove contaminated clothing and protective equipment before entering eating areas.

Keep away from heat sources.

Appropriate risk management measures must be adopted at the workplace. They have to be selected and applied, following the risks assessment carried out by the employer, in connection with the working activity (in according with Directive 98/24/EEC).

Gloves resistant to chemical agents as for the EN 374, parts 1, 2 e 3 and the European Directive 89/89/EEC. The gloves material must be waterproof and stable against the product/substance/formulation. Material: nitrile (nitrilic rubber), ipoallergenic. Thickness: not inferior to 0.12 mm.

Not required for normal use. However, operate according to good working practices and adopt protective equipment in accordance with relevant UNI EN (EN 166) standards.

Handle in a chemical hood if hot worked.

Select the suitable protective equipment according to the use of the product and possible exposure. Wash with soap and water after removing protective clothing.

Avoid release to the environment.

The product is stable until the expiration date shown on the box and on the labels when stored at -20°C.

The product is non-reactive under normal conditions of use, storage and transport.

Under normal conditions of storage and use, hazardous reactions will not occur.

Avoid overheating. Do not expose to direct sunlight, heat sources and high temperatures. Avoid contact with incompatible materials.

Strong bases.

Thermal decomposition or combustion may generate toxic and hazardous fumes of COx, NH3, HCl, NOx.