NextSDS Logo
Safety Data Sheet EN

Clobazam-13C6 (1.0mg/ml in Acetonitrile)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Clobazam-13C6 (1.0mg/ml in Acetonitrile)
Product Form
Not applicable
Product Code
TRC-KIT3725-1X1ML

Regulatory Identifiers

CAS Number
N/A
UFI Code
SQKW-J0E3-H000-P9DC

Identified Uses

Laboratory use

Uses advised against

No information available

Manufacturers & Suppliers

LGC Limited logo

LGC Limited

distributor

Queens Road, Teddington, Middlesex TW11 0LY, UNITED KINGDOM

+44 (0) 20 8943 7000

http://www.lgcstandards.com

Emergency Contacts

CHEMTREC

1-800-424-9300

CHEMTREC

+1 703-741-3877

Emergency Contact

112

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 4 H302
Acute Tox. Cat. 4 H312
Acute Tox. Cat. 4 H332
Eye Irrit. Cat. 2 H319
Flam. Liq. Cat. 2 H225

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H225 Highly flammable liquid and vapour
H302 Harmful if swallowed
H312 Harmful in contact with skin
H319 Causes serious eye irritation
H332 Harmful if inhaled

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
P264 Wash face, hands and any exposed skin thoroughly after handling
P280 Wear protective gloves/protective clothing/eye protection/face protection
P321 Specific treatment (see supplemental first aid instructions on this label)
P370 + P378 In case of fire: Use dry chemical, CO2, water spray or alcohol-resistant foam to extinguish
P403 + P235 Store in a well-ventilated place. Keep cool

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of organic compounds.

Chemical Name CAS Number Concentration Hazardous
Acetonitrile EC: 200-835-2 75-05-8 80 - 100% Yes
Clobazam-13C6 1782501-70-5 0.1 - 1% Yes

This product contains a stable isotope.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. If symptoms persist, call a doctor. If breathing has stopped, give artificial respiration. Get medical attention immediately.

Symptoms: Coughing and/ or wheezing. Difficulty in breathing.

Skin contact

Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. If symptoms persist, call a doctor.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Do not rub affected area. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.

Symptoms: Redness and tearing of the eyes. Burning sensation.

Ingestion

Do NOT induce vomiting. Rinse mouth. Never give anything by mouth to an unconscious person. Get medical attention.

Immediate Medical Attention

Get medical attention immediately (inhalation), Get medical attention if irritation develops and persists (eye), Get medical attention (ingestion).

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry chemical. Carbon dioxide (CO2). Water spray. Alcohol resistant foam.

Unsuitable media

Do not scatter spilled material with high pressure water streams.

Specific hazards

Risk of ignition. Keep product and empty container away from heat and sources of ignition. In the event of fire, cool tanks with water spray.

Instructions

In the event of fire, cool tanks with water spray.

Firefighter Protection

Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate personnel to safe areas. Keep people away and upwind of spill/leak. ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Take precautionary measures against static discharges. All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Avoid breathing vapours or mists.

Environmental

Prevent further leakage or spillage if safe to do so. Prevent product from entering drains.

Cleanup methods

Dam up. Soak up with inert absorbent material. Pick up and transfer to properly labelled containers.

Materials: inert absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use personal protection equipment. Avoid breathing vapours or mists. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use grounding and bonding connection when transferring this material to prevent static discharge, fire or explosion. Use with local exhaust ventilation. Use spark-proof tools and explosion-proof equipment. Keep in an area equipped with sprinklers. Use according to package label instructions. Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. In case of insufficient ventilation, wear suitable respiratory equipment.

Storage

Please refer to the manufacturer's certificate for specific storage and transport temperature conditions. Store only in the original receptacle unless other advice is given on the CoA. Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat, sparks, flame and other sources of ignition (i.e., pilot lights, electric motors and static electricity). Keep in properly labelled containers. Do not store near combustible materials. Keep in an area equipped with sprinklers. Store in accordance with the particular national regulations. Store in accordance with local regulations. Keep out of the reach of children. Store locked up.

Hygiene

Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Wash hands before breaks and after work. Wear suitable gloves and eye/face protection. Contaminated work clothing should not be allowed out of the workplace. Regular cleaning of equipment, work area and clothing is recommended. Wash hands before breaks and immediately after handling the product.

Fire prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use grounding and bonding connection when transferring this material to prevent static discharge, fire or explosion. Use spark-proof tools and explosion-proof equipment. Keep in an area equipped with sprinklers.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.

Hands

Wear protective butyl rubber gloves. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374. Wear suitable gloves. Impervious gloves.

Eyes

Avoid contact with eyes. Wear safety glasses with side shields (or goggles). Tight sealing safety goggles.

Respiratory

No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.

Skin/Body

Wear suitable protective clothing. Long sleeved clothing. Chemical resistant apron. Antistatic boots.

Environmental

Do not allow into any sewer, on the ground or into any body of water.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Liquid
Colour
colourless
Colour Intensity
---
Form
---
Odor
Aromatic.
Odor Threshold
No information available
Ph
No data available
Melting Point
-45.7 °C
Boiling Point
81.6 °C
Flash Point
2 °C
Freezing Point
-45.7 °C
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
94.51 - 98.64 hPa
Vapor Density
---
Relative Density
0.7857
Bulk Density
No data available
Density
No data available
Flammability
No data available
Upper Explosive Limit
17 Vol%
Lower Explosive Limit
3 Vol% - 50 g/m³
Explosive Limits
---
Auto Ignition Temperature
524 °C
Decomposition Temperature
No data available
Solubility
No data available
Partition Coefficient
-0.34
Solubility In Water
No data available
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
0.35 mPa s
Kinematic Viscosity
No data available
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

No information available.

Hazardous reactions

None under normal processing.

Avoid

Heat, flames and sparks. Excessive heat.

Incompatible

None known based on information supplied.

Decomposition

None known based on information supplied.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.

Disposal

Should not be released into the environment.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1648
Shipping Name
Acetonitrile mixture
Transport Class
3
Packing Group
II
IATA

ERG Code 3L

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment is not required for this substance

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Clobazam-13C6 (1.0mg/ml in Acetonitrile)?

The signal word is danger.

What is the physical form of Clobazam-13C6 (1.0mg/ml in Acetonitrile)?

Clobazam-13C6 (1.0mg/ml in Acetonitrile) is a liquid appearing as liquid with colourless color. It has aromatic. odor.

What is the solubility of Clobazam-13C6 (1.0mg/ml in Acetonitrile)?

No data available

What is Clobazam-13C6 (1.0mg/ml in Acetonitrile) used for?

Laboratory use

What are the hazard statements for Clobazam-13C6 (1.0mg/ml in Acetonitrile)?

This substance has 5 hazard statements:

  • H225: Highly flammable liquid and vapour
  • H302: Harmful if swallowed
  • H312: Harmful in contact with skin
  • H319: Causes serious eye irritation
  • H332: Harmful if inhaled

What is the melting point of Clobazam-13C6 (1.0mg/ml in Acetonitrile)?

The melting point is -45.7 °C and the boiling point is 81.6 °C.