Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- AMH CS Elecsys
- Product Code
- 06331084190
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Roche Diagnostics Deutschland GmbH
manufacturer
Sandhoferstrasse 116, 68305 Mannheim
+496217590
Emergency Contacts
Central Works Security
+49(0)621-759-2203
Centre for detoxification: Mainz
+49(0)6131-19240
Centre for detoxification: Munich
+49(0)89-19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
No hazardous ingredients
Notes
Not a hazardous substance or mixture.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If unconscious place in recovery position and seek medical advice. If symptoms persist, call a physician.
If on skin, rinse well with water.
Immediately flush eye(s) with plenty of water. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Keep respiratory tract clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Rinse mouth with water.
Medical Treatment
The first aid procedure should be established in consultation with the doctor responsible for industrial medicine.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
No information available.
Standard procedure for chemical fires.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. Local authorities should be advised if significant spillages cannot be contained.
Keep in suitable, closed containers for disposal
Related Products
Similar products with comparable safety profiles
AMH PC Elecsys
---
AMH Elecsys cobas e 100
---
AMH Gen II Calibrator A
---
Elecsys sFlt-1
---
Elecsys sFlt-1
---
di-Ammonium hydrogen citrate for analysis EMSURE® ACS,Reag. Ph Eur
---
AMMONIUM IRON(III) SULFATE DODECAHYDRATE FOR ANALYSIS EMSURE® ACS,ISO,REAG. PH EUR
CAS: 7783-83-7
HDC-ASI-002
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid formation of respirable particles. Do not breathe vapours/dust. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. Smoking, eating and drinking should be prohibited in the application area. Persons susceptible to skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used.
Keep container tightly closed in a dry and well-ventilated place. Electrical installations / working materials must comply with the technological safety standards.
Wash hands before breaks and at the end of workday.
Avoid dust formation. Provide appropriate exhaust ventilation at places where dust is formed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material: Protective gloves. Remarks: The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. This recommendation is only valid for the product mentioned in the safety data sheet and provided by us and for the application specified by us. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. The suitability for a specific workplace should be discussed with the producers of the protective gloves.
Eye wash bottle with pure water. Tightly fitting safety goggles
Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
No decomposition if stored and applied as directed.
No data available
No data available
No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Send to a licensed waste management company.
Do not contaminate ponds, waterways or ditches with chemical or used container.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
EUH210: Safety data sheet available on request. EUH208: Contains 2-methyl-2H-isothiazol-3-one hydrochloride, 26172-54-3. May produce an allergic reaction.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for AMH CS Elecsys?
The signal word is no signal word.
What is the physical form of AMH CS Elecsys?
AMH CS Elecsys is a (lyophilised) appearing as (lyophilised) with yellow color. It has characteristic odor.
What is the solubility of AMH CS Elecsys?
soluble
What is the melting point of AMH CS Elecsys?
The melting point is No data available and the boiling point is No data available.