Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Kremer Solvent D 40
- Product Code
- 70471
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial use
Manufacturers & Suppliers
Kremer Pigmente GmbH & Co. KG
manufacturer
Hauptstr. 41-47, 88317 Aichstetten, Germany
+49 7565 914480
http://www.kremer-pigmente.com
Emergency Contacts
Emergency Contact
+49 7565 914480
Mon-Fri 8:00 - 17:00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of paraffinic and naphthenic hydrocarbons C9-C11.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C11-C11, n-Alkanes, Isoalkanes, Cyclenes, <2 % Aromatics EC: 919-857-5 | 64742-48-9 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Take affected person to fresh air. Give artificial respiration in case breathing is not regular or if it has stopped. In case of unconsciousness place patient stable in side position for transportation.
Symptoms: Narcotic effects, breathing difficulties, headache, dizziness.
Wash off with plenty of water and soap. Consult a physician if irritation persists.
Remove contact lens. Rinse open eyes with plenty of water for at least 10 minutes.
Do not induce vomiting. Risk of aspiration! Immediately get medical help. In case of spontaneous vomiting, bring unconsciousness person in a stable side position.
Symptoms: If vomiting occurs after ingestion, aspiration into the lungs can occur.
Immediate Medical Attention
Immediately get medical help.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water mist, extinguishing powder, foam, carbon dioxide.
Water with full jet.
Flammable liquid. Product floats on water surface and does not dissolve. Fumes can form an explosive mixture with air. The vapor is heavier than air, spreads along the ground and distant ignition is possible.
Cool closed containers exposed to fire with water mist.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear appropriate protective equipment. Keep spectators away. Ensure adequate ventilation. Keep away from sources of heat and ignition. Avoid contact with skin and eyes. Do not ingest or inhale.
Prevent contamination of soils, drains and surface water.
Wipe up with adsorbant material (e.g cloth, fleece).
Materials: cloth, fleece
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep containers tightly closed. Provide adequate ventilation. Avoid contact with eyes and skin. Do not inhale gas/fumes/vapours/aerosols.
Store in tightly sealed containers in a dry and cool room. Store product in a well ventilated area. Protect against heat.
Take off contaminated clothing immediately. Avoid contact with eyes and skin.
Do not store together with ignitable sources, heat and fire. Take measures to prevent electrostatic discharge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further measures, see Section 7 and 8.
Solvent resistant protective gloves. Protective glove material: Nitrile rubber (480 min, 0.4 mm) Fluoro carbon rubber - FKM (> 480 min; 0.4 mm).
Tightly fitting safety goggles (EN 166).
Respiratory equipment required in case of insufficient ventilation, filter type A (organic gases and vapors).
Protective clothing.
Prevent contamination of open water ways and sewage system. Avoid contamination of ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
Stable if used according to specifications.
Formation of explosive vapor-air-mixtures possible.
Avoid contact with heat, sparks and open fire.
Strong oxidizing agents.
Carbon oxides. Thermal decomposition may yield toxic or irritating gases.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Aquatic Toxicity
12.1. Aquatic Toxicity
12.1. Aquatic Toxicity
12.1 Toxicity
No information available for bacteria or algae toxicity.
12.2. Persistence and Degradability
The product floats and evaporates from water surfaces. Individual components are readily biodegradable.
12.3. Bioaccumulation
No data available.
12.4. Mobility
No data available.
12.5. Results of PBT- und vPvP Assessment
The contents of the preparation do not comply with the criteria for the classification as PBT or vPvB.
12.6. Endocrine Disrupting Properties
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH.
12.7. Other Adverse Effects
Water hazard class 1 (slightly hazardous). Prevent contamination of ground water, waterways, or sewage systems.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Solvent recovery / regeneration.
Do not let product enter water systems.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3295
- Shipping Name
- HYDROCARBONS, LIQUID, N.O.S.
- Transport Class
- 3
- Packing Group
- III
The rules for Dangerous Goods (ADR) must also be observed within the company grounds.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Observe employment restrictions in accordance with the law on the protection of mothers at work, in training, and in education (Mutterschutzgesetz – MuSchG). The employment restrictions for young workers in accordance with the Youth Employment Protection Law are to be observed.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Kremer Solvent D 40?
The signal word is danger.
What is the physical form of Kremer Solvent D 40?
Kremer Solvent D 40 is a liquid appearing as colorless with colorless color. It has characteristic odor.
What is Kremer Solvent D 40 used for?
Industrial use
What are the hazard statements for Kremer Solvent D 40?
This substance has 3 hazard statements:
- H226: Flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H336: May cause drowsiness or dizziness.
What is the melting point of Kremer Solvent D 40?
The melting point is < -50°C and the boiling point is 155 - 192°C.