Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Weller Pyropen Refill, 75 ml / 42g
- Product Code
- T00516160 99_49 / T0051605999 / T00516160 90
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 5JK0-G0US-500S-Q60P
Identified Uses
burning gas
Manufacturers & Suppliers
Apex Tool Group UK Ltd
importer
20 Farringdon Street, 8th Floor, United Kingdom-EC4A 4AB London
Weller Tools GmbH
manufacturer
Carl-Benz-Strasse 2, Germany-74354 Besigheim
+49 7143 580-0
Emergency Contacts
Emergency Contact
+44 740 8836 404
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. In case of respiratory tract irritation, consult a physician.
After contact with skin, wash immediately with plenty of water and soap.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.
Medical Treatment
No data available
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), Extinguishing powder, alcohol resistant foam, Water spray jet
Full water jet
No data available
Use water spray jet to protect personnel and to cool endangered containers.
Firefighter Protection
Wear full chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove all sources of ignition. Provide adequate ventilation. Remove persons to safety.
No special environmental measures are necessary.
Related Products
Similar products with comparable safety profiles
Weller Pyropen Refill
---
RS Pro Butane 200ml Gas Torch Refill
UFI: S2X7-F0U2-Y009-75D3
WIENERBERGER PU SPRAY ADHESIVE, CLEAR, 22L
UFI: 6NAT-Y0X7-Q00A-AR2N
CRC® Penetrating Oil, 311 g
---
WELDINGSPRAY PERFECT - 400 ML
---
edding Permanent Marker Refill Ink T25, T100, T1000, MTK25 (red) contained in: edding 400
---
edding Permanent Marker Refill Ink T25, T100, T1000 (blue) contained in: edding 800
---
Weld Spray Perfect 400ml
UFI: CNM2-H05M-G00N-W4MM
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
After use replace the closing cap immediately.
Keep container tightly closed in a cool, well-ventilated place. Protect against: Heat, UV-radiation/sunlight
Keep away from sources of ignition - No smoking. Keep away from sources of heat (e.g. hot surfaces), sparks and open flames. Do not spray on naked flames or any incandescent material. Handle with care - avoid bumps, friction and impact.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Suitable material: NBR (Nitrile rubber), EN374. Required properties: gas-tight. Breakthrough time: >480 min. Remark: The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances.
Eye protection: not required.
Respiratory protection necessary at: insufficient ventilation
See section 7. No additional measures necessary.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This information is not available.
This information is not available.
This information is not available.
Avoid high temperatures or direct sunlight. Further information on proper storage: see section 7.
No information available.
No information available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Recycle according to official regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2037
- Shipping Name
- RECEPTACLES, SMALL, CONTAINING GAS
- Transport Class
- 2
not applicable
Limited Quantities (LQ) 120 ml
not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Weller Pyropen Refill, 75 ml / 42g?
The signal word is danger.
What is the physical form of Weller Pyropen Refill, 75 ml / 42g?
Weller Pyropen Refill, 75 ml / 42g is a compressed gas with colourless color. It has sulphur odor.
What is Weller Pyropen Refill, 75 ml / 42g used for?
burning gas
What are the hazard statements for Weller Pyropen Refill, 75 ml / 42g?
This substance has 1 hazard statement:
- H220: Extremely flammable gas.
What is the melting point of Weller Pyropen Refill, 75 ml / 42g?
The melting point is not determined and the boiling point is -44 °C.