Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Interflon Lube TF
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
lubricant
Manufacturers & Suppliers
Interflon BV
manufacturer
Belder 47, 4704 RK Roosendaal, Netherlands
+31 (0)165 553911
http://www.Interflon.com
Emergency Contacts
UK National Poison Centre
+44 870 600 6266
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of mineral and vegetable oils, additives and Micpol®
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, < 2% aromatics EC: 918-481-9 | 64742-48-9 | 25 - 50% | Yes |
| Distillates (petroleum), hydro-treated heavy paraffinic EC: 265-157-1 | 64742-54-7 | 1 - 5% | Yes |
| (Z)-N-methyl-N-(1-oxo-9-octa-decenyl)glycine EC: 203-749-3 | 110-25-8 | 1 - 5% | Yes |
For full text of Hazard- and EU Hazard-statements: see SECTION 16.
Notes
GHS-HC: Harmonised classification (the classification of the substance corresponds to the entry in the list according to 1272/2008/EC, Annex VI) L(b): The classification as a carcinogen is not required. The substance contains less than 3 % DMSO extract
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. Provide fresh air.
Wash with plenty of soap and water.
Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.
Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water mist, Fire extinguishing powder, Carbon dioxide (CO2)
Water jet
In case of fire and/or explosion do not breathe fumes. Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
Use suitable breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Wipe up with absorbent material (e.g. cloth, fleece). Collect spillage: sawdust, kieselgur (diatomite), sand, universal binder
Materials: cloth, fleece, sawdust, kieselgur (diatomite), sand, universal binder
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in well-ventilated areas.
Store in accordance with local/regional/national/international regulations. Keep container tightly closed and in a well-ventilated place. Keep in a cool place.
Remove contaminated clothing and protective equipment before entering eating areas. Never place chemicals in containers that are normally used for food or drink.
Keep in a cool place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only in well-ventilated areas.
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Wear protective gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Type of material. NBR: acrylonitrile-butadiene rubber. CR: chloroprene (chlorobutadiene) rubber. PVC: polyvinyl chloride.
Work with safety glasses.
In case of insufficient ventilation, wear suitable respiratory equipment. Type: A-P2 (combined filters against particles and organic gases and vapours, colour code: Brown/White).
Preventive skin protection (barrier creams/ointments) is recommended. Take recovery periods for skin regeneration.
Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
See below "Conditions to avoid".
Concerning incompatibility: see below "Conditions to avoid" and "Incompatible materials".
No known hazardous reactions.
There are no specific conditions known which have to be avoided.
Oxidisers
Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of this material and its container to hazardous or special waste collection point.
Dispose of this material and its container to hazardous or special waste collection point.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- not relevant
- Packing Group
- not assigned
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Chemical safety assessments for substances in this mixture were not carried out.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Interflon Lube TF?
The signal word is warning.
What is the physical form of Interflon Lube TF?
Interflon Lube TF is a liquid with yellowish brown color. It has like oil odor.
What is the solubility of Interflon Lube TF?
not determined
What is Interflon Lube TF used for?
lubricant
What are the hazard statements for Interflon Lube TF?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of Interflon Lube TF?
The melting point is not determined and the boiling point is 186 °C at 1 atm.