NextSDS Logo
Safety Data Sheet EN

Interflon Lube EP+

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Interflon Lube EP+

Regulatory Identifiers

CAS Number
N/A

Identified Uses

lubricant

Manufacturers & Suppliers

Interflon BV logo

Interflon BV

manufacturer

Belder 47, 4704 RK Roosendaal, Netherlands

+31 (0)165 553911

http://www.Interflon.com

Emergency Contacts

Poison Control Center

1-800-268-9017

24 hours a day, 7 days a week; Mon. - Fri. 12:00 AM - 05:59 PM

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Flam. Liq. Cat. 4 H227
Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H227 Combustible liquid.
H315 Causes skin irritation.
H319 Causes serious eye irritation.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P280 Wear protective gloves.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P321 Specific treatment (see on this label).
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P370 + P378 In case of fire: Use sand, carbon dioxide or powder extinguisher to extinguish.
P403 Store in a well-ventilated place.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of mineral and vegetable oils, additives and Micpol®

Chemical Name CAS Number Concentration Hazardous
Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, < 2% aromatics 64742-48-9 10 - 25% Yes
Glycine, N-methyl-, N-coco acyl derivs. 68411-97-2 1 - 2.5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. In case of respiratory tract irritation, consult a physician. Provide fresh air.

Skin contact

Wash with plenty of soap and water.

Eye contact

Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.

Ingestion

Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting.

Immediate Medical Attention

In all cases of doubt, or when symptoms persist, seek medical advice. If breathing is irregular or stopped, immediately seek medical assistance. In case of respiratory tract irritation, consult a physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water mist, Fire extinguishing powder, Carbon dioxide (CO2)

Unsuitable media

Water jet

Specific hazards

In case of insufficient ventilation and/or in use, may form flammable/explosive vapor-air mixture. Solvent vapors are heavier than air and may spread along floors. Places which are not ventilated, e.g. unventilated below ground level areas such as trenches, conduits and shafts, are particularly prone to the presence of flammable substances or mixtures.

Instructions

Coordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.

Firefighter Protection

In case of fire and/or explosion do not breathe fumes. Use suitable breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Remove persons to safety.

Environmental

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.

Cleanup methods

Wipe up with absorbent material (e.g. cloth, fleece). Collect spillage: sawdust, kieselgur (diatomite), sand, universal binder

Materials: absorbent material (e.g. cloth, fleece), sawdust, kieselgur (diatomite), sand, universal binder

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use local and general ventilation. Avoidance of ignition sources. Keep away from sources of ignition - No smoking. Take precautionary measures against static discharge. Use only in well-ventilated areas. Due to danger of explosion, prevent leakage of vapours into cellars, flues and ditches. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools.

Storage

Store in accordance with local/regional/national/international regulations. Keep container tightly closed and in a well-ventilated place. Keep cool. Protect from sunlight.

Hygiene

Remove contaminated clothing and protective equipment before entering eating areas. Never place chemicals in containers that are normally used for food or drink.

Fire prevention

Avoidance of ignition sources. Keep away from sources of ignition - No smoking. Take precautionary measures against static discharge. Use only non-sparking tools.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use only in well-ventilated areas.

Hands

Wear protective gloves. When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Check leak-tightness/impermeability prior to use. Type of material. NBR: acrylonitrile-butadiene rubber. CR: chloroprene (chlorobutadiene) rubber. PVC: polyvinyl chloride.

Eyes

Use safety goggle with side protection.

Respiratory

In case of insufficient ventilation, wear suitable respiratory equipment. Type: A-P2 (combined filters against particles and organic gases and vapors, color code: Brown/White).

Skin/Body

Preventive skin protection (barrier creams/ointments) is recommended.

Environmental

Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Form
---
Dynamic Viscosity
---
Appearance
liquid
Partition Coefficient
this information is not available
Cloud Point
---
Softening Point
---
Voc Content
---
State Under Standard Conditions
---
Density
0.89 g/cm³ at 20 °C
Physical State
liquid
Flash Point
65 °C
Physical State Data
liquid
Evaporation Rate
Not determined
Decomposition Temperature
---
Flammability
not relevant, (fluid)
Lower Explosive Limit
0.6 vol%
Upper Explosive Limit
7 vol%
Melting Point
not determined
Crystallisation Point
---
Colour
brown
Auto Ignition Temperature
>200 °C
Solubility In Fat
---
Ph
not determined
Explosive Limits
---
Colour Intensity
---
Metal Corrosion
---
Kinematic Viscosity
120 cSt at 40 °C
Freezing Point
not determined
Molecular Weight
---
Solubility In Water
---
Relative Density
---
Odor
Like Oil
Vapor Density
this information is not available
Solidification Point
---
Bulk Density
---
Relative Evaporation Rate
---
Vapor Pressure
not determined
Properties Status
---
Odor Threshold
---
Solubility
not determined
Boiling Point
not determined
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

See below "Conditions to avoid".

Reactivity

Concerning incompatibility: see below "Conditions to avoid" and "Incompatible materials". The mixture contains reactive substance(s). Risk of ignition. If heated: Risk of ignition

Hazardous reactions

No known hazardous reactions.

Avoid

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Hints to prevent fire or explosion: Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools. Take precautionary measures against static discharge.

Incompatible

Oxidizers

Decomposition

Hazardous combustion products: see section 5.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Solvent reclamation/regeneration.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

Shipping Name
not relevant
Transport Class
not assigned
Packing Group
not assigned
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical safety assessments for substances in this mixture were not carried out.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Interflon Lube EP+?

The signal word is warning.

What is the physical form of Interflon Lube EP+?

Interflon Lube EP+ is a liquid appearing as liquid with brown color. It has like oil odor.

What is the solubility of Interflon Lube EP+?

not determined

What is Interflon Lube EP+ used for?

lubricant

What are the hazard statements for Interflon Lube EP+?

This substance has 3 hazard statements:

  • H227: Combustible liquid.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.

What is the melting point of Interflon Lube EP+?

The melting point is not determined and the boiling point is not determined.