Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Epoxy basis -2 commonly used epoxy resin.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS07
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H411: Toxic to aquatic life with long lasting effects.
Precautionary Statements
- P261: Avoid breathing mist/vapours.
- P264: Wash skin thoroughly after handling.
- P273: Avoid release to the environment.
- P280: Wear protective gloves/eye protection/face protection.
- P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
- P391: Collect spillage.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
SANIKOM D.O.O.
national supplier
Vrtna ulica 39 4294 Krie, Slovenia
SI
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency
112
SI
Supplier
051-354-081
SI
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| bis-[4-(2,3-epoxypropoxy)phenyl]propane EC: 216-823-5 | 1675-54-3 | 70-90% | ⚠️ Hazardous |
| Ostraan,mono[(C12-C14-alkyloxy)methyl]derivaten EC: 271-846-8 | 68609-97-2 | 10-20% | ⚠️ Hazardous |
| FORMALDEHYDE, OLIGOMERIC REACTION PRODUCTS WITH 1-CHLORO-2,3-EPOXYPROPANE AND PHENOL EC: 500-006-8 | 9003-36-5 | 10-20% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove patient to fresh air - move out of dangerous area. If symptoms occur, seek medical advice.
Symptoms:
Excessive exposure to spray mist, fog, or vapours may cause respiratory irritation. Coughing, sneezing, nasal discharge, labored breathing.
🖐️ Skin Contact
Take off all contaminated clothing. Areas of the body that have come into contact with the product must be rinsed with water. If symptoms persist, seek medical attention. Wash contaminated clothes and shoes before reuse.
Symptoms:
Itching, redness, pain. May cause sensitisation by skin contact (symptoms: itching, redness, rashes).
👁️ Eye Contact
Immediately flush eyes with running water, keeping eyelids apart. If irritation does not stop, seek professional medical treatment! If the patient is wearing contact lenses, remove them immediately.
Symptoms:
Redness, tearing, pain.
🍽️ Ingestion/Swallowing
Do not induce vomiting! Rinse mouth thoroughly with water. Never give anything by mouth to an unconscious person. Consult a physician. Show the physician the safety data sheet or label.
Symptoms:
Irritates mucous membranes in the mouth, throat, esophagus and in gastrointestinal area. May cause nausea/vomiting and diarrhea.
Medical Treatment
Treat symptomatically.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Provide good ventilation and local exhaust in areas with increased concentration.
🧤 Hand Protection
Protective gloves (EN 374). The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Observe the manufacturer's instructions regarding the use, storage, maintenance and replacement of gloves. In case of damage or at the first signs of wear and tear, change the gloves immediately. The penetration time is determined by the protective glove manufacturer and must be observed. The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves. Appropriate materials: Butyl rubber (> 480 min, BS EN ISO 374), nitrile rubber (< 480 min, BS EN ISO 374), Neoprene (BS EN ISO 374).
👁️ Eye Protection
Tight fitting protective goggles (EN 166). If there is danger of splash or spray use the face shield (BS EN ISO 163211:2022).
😷 Respiratory Protection
At elevated concentrations of vapours/aerosols in the air wear a mask (EN 140) with filter A2-P2 (EN 14387).
🦺 Skin/Body Protection
Cotton protective clothing and shoes that cover the entire foot (BS EN ISO 20345:2022). At high risk of skin exposure chemical suits (BS EN ISO 6530:2005) and boots may be required (BS EN ISO 20345:2022).
🌍 Environmental Exposure Controls
Implement measures to protect the environment. Avoid discharge into drains and surface waters.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN 3082
📦 Proper Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (bis-[4-(2,3-epoxypropoxy)phenyl]propane, Formaldehyde, oligomeric reaction products with 1-chloro-2,3-epoxypropane and phenol)
⚠️ Transport Hazard Class
9
📋 Packing Group
III
🚢 IMDG Maritime Transport Precautions
Special packing provisions PP1
✈️ IATA Air Transport Precautions
Limited Quantity, Packing Instructions (Ltd Qty, Pkg Inst) Y964; Limited quantities 5 L; Packing Instructions (Pkg Inst) 964; Maximum Net Quantity/Package (Max Net Qty/Pkg) 450 L; Cargo Aircraft Only, Packing Instructions (CAO, Pkg Inst) 964; Excepted quantities E1
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Epoxy basis -2?
The signal word for this substance is "warning".
What is the physical form of Epoxy basis -2?
Epoxy basis -2 is a liquid with colourless color. It has mild odor.
What is the solubility of Epoxy basis -2?
Water: Insoluble
What is Epoxy basis -2 used for?
Epoxy resin
What are the hazard statements for Epoxy basis -2?
This substance has 4 hazard statements: H315: Causes skin irritation. H317: May cause an allergic skin reaction. H319: Causes serious eye irritation. H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Epoxy basis -2?
The melting point is No information. and the boiling point is > 200 C at 1013 hPa.