Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- KEMPERTEC EP5-Primer (B)
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
KEMPER SYSTEM GmbH & Co. KG
manufacturer
Holländische Strasse 32-36, 34246 Vellmar, Deutschland / Germany
+49 (0)561 / 8295-0
Emergency Contacts
Giftinformationszentrum der Länder Rheinland-Pfalz und Hessen
+49 (0)6131 / 19 24 0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture: consisting of the following components.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| m-phenylenebis(methylamine) EC: 216-032-5 | 1477-55-0 | 25 - 50% | Yes |
| Phenol, styrenated EC: 262-975-0 | 61788-44-1 | 25 - 50% | Yes |
| 3-aminomethyl-3,5,5-trimethylcyclohexylamine EC: 220-666-8 | 2855-13-2 | 12.5 - 25% | Yes |
| Polyoxypropylenediamine | 9046-10-0 | 12.5 - 25% | Yes |
| 2,4,6-tris(dimethylaminomethyl)phenol EC: 202-013-9 | 90-72-2 | 2.5 - 10% | Yes |
| Lauryl alcohol EC: 203-982-0 | 112-53-8 | 2.5 - 10% | Yes |
| Salicylic acid EC: 200-712-3 | 69-72-7 | 2.5 - 10% | Yes |
| 1,3-Cyclohexanedimethanamine EC: 219-941-5 | 2579-20-6 | 2.5 - 10% | Yes |
| calcium nitrate etrahydrate EC: 233-332-1 | 13477-34-4 | 2.5 - 10% | Yes |
| 3,3,5-trimethylhexamethylene-diamine EC: 247-063-2 | 25513-64-8 | 2.5 - 10% | Yes |
| Bis(isopropyl)naphthalene EC: 254-052-6 | 38640-62-9 | 0.5 - 2.5% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly. Seek medical treatment in case of complaints.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor. Protect unharmed eye.
Drink plenty of water and provide fresh air. Call for a doctor immediately. If symptoms persist consult doctor.
Immediate Medical Attention
Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions.
Firefighter Protection
Do not inhale explosion gases or combustion gases.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation. Avoid contact with skin and eyes.
Do not allow product to reach sewage system or any water course. Do not allow to enter sewers/ surface or ground water. Prevent from spreading (e.g. by damming-in or oil barriers).
Do not flush with water or aqueous cleansing agents. Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
KEMPEROL 2K-PUR (B)
---
KEMPEROL 2K-PUR (A)
---
TECHNOMELT PUR PRIMER 6B-23
UFI: SF6K-AWX7-M20Q-K32Y
2C-EP Primer, quick curing
---
HIGH BUILD ETCH PRIMER
---
SAFE STEP METAL PRIMER - BASE
---
UV-Primer LM 4567
---
3369 / 3380 - CombiPrimer primers red & grey
UFI: A630-V02Q-R00P-9WN7
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
Store in cool, dry place in tightly closed receptacles. Store only in the original receptacle. Protect from frost. Store in dry conditions. Keep container tightly sealed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. Check protective gloves prior to each use for their proper condition. Only use chemical-protective gloves with CE-labelling of category III. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. After use of gloves apply skin-cleaning agents and skin cosmetics. Recommended materials: Butyl rubber, BR; Recommended thickness of the material: ≥ 0.5 mm; Penetration time (min.): < 480 min. As protection from splashes gloves made of the following materials are suitable: Nitrile rubber, NBR; Recommended thickness of the material: ≥ 0.1 mm; Penetration time (min.): < 10. The determined penetration times according to EN 16523-1:2015 are not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50% of the penetration time, is recommended.
Tightly sealed goggles. Protective goggles and facial protection - Classification according to EN 166
When used properly and under normal conditions, breathing protection is not required. Use suitable respiratory protective device in case of insufficient ventilation. Filter A/P2. Respiratory protection - Gas filters and combination filters according to (DIN EN 141)
protective clothing (EN 13034)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
Violent reactions with: amines and acids.
Store away from heat.
Strong oxidizing agents: amines and acids.
Does not decompose during its intended use.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system. Disposal according to official regulations
Must not be disposed together with household garbage. Do not allow product to reach sewage system. Disposal according to official regulations
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2735
- Shipping Name
- AMINES, LIQUID, CORROSIVE, N.O.S. (m-phenylenebis(methylamine), CALCIUM NITRATE)
- Transport Class
- 8
- Packing Group
- II
Warning: Corrosive substances.
Warning: Corrosive substances.
Warning: Corrosive substances.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Employment restrictions concerning juveniles must be observed. Employment restrictions concerning women of child-bearing age must be observed. Employment restrictions concerning pregnant and lactating women must be observed.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for KEMPERTEC EP5-Primer (B)?
The signal word is danger.
What is the physical form of KEMPERTEC EP5-Primer (B)?
KEMPERTEC EP5-Primer (B) is a fluid appearing as fluid, yellow, amine-like with yellow color. It has amine-like odor.
What is the solubility of KEMPERTEC EP5-Primer (B)?
Not miscible or difficult to mix.
What are the hazard statements for KEMPERTEC EP5-Primer (B)?
This substance has 4 hazard statements:
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
- H317: May cause an allergic skin reaction.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of KEMPERTEC EP5-Primer (B)?
The melting point is Undetermined. and the boiling point is >200 °C.