Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 2C-PUR Topcoat MIO
- Product Code
- DB 510 (M923-E5610)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coatings and paints, thinners, paint removers Industrial uses: Uses of substances as such or in preparations at industrial sites Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
Uses advised against
Do not use for private purposes (household).
Manufacturers & Suppliers
Geholit + Wiemer Lack- und Kunststoff-Chemie GmbH
manufacturer
Sofienstraße 36, 76676 Graben-Neudorf
+49 (0) 7255 / 99 0
Emergency Contacts
Emergency Contact
+49 (0) 7255 / 99 299
Mo - Thu 7.00 - 17.00 Uhr Fr 7.00 - 15.30 Uhr
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| SOLVENTNAPHTHA (Benzene content < 0,1 %) EC: 918-668-5 | 64742-95-6 | 10 - 15% | Yes |
| N-BUTYL ACETATE EC: 204-658-1 | 123-86-4 | 5 - 10% | Yes |
| XYLENE EC: 215-535-7 | 1330-20-7 | 1 - 5% | Yes |
| Bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacat EC: 255-437-1 | 41556-26-7 | 0.1 - 0.25% | Yes |
Full text of H- and EUH-phrases: see section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration. In case of respiratory tract irritation, consult a physician. Provide fresh air.
Symptoms: Respiratory complaints
Wash immediately with: Water and soap Do not wash with: Solvents/Thinner
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.
Do NOT induce vomiting. Rinse mouth thoroughly with water. Let water be drunken in little sips (dilution effect).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
alcohol resistant foam ABC-powder Extinguishing blanket
In case of fire may be liberated: Burning produces heavy smoke.
Use water spray jet to protect personnel and to cool endangered containers.
Firefighter Protection
Do not inhale explosion and combustion gases. Use suitable breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection equipment. Remove all sources of ignition. Provide adequate ventilation.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. Ensure waste is collected and contained.
Absorb with liquid-binding material.
Materials: liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
It is recommended to design all work processes always so that the following is excluded: Inhalation of vapours or spray/mists Skin contact Eye contact Only use the material in places where open light, fire and other flammable sources can be kept away. Handle and open container with care. If local exhaust ventilation is not possible or not sufficient, the entire working area should be ventilated by technical means. Keep away from sources of ignition - No smoking. When using do not eat, drink, smoke, sniff.
Keep only in the original container in a cool, well-ventilated place. Keep container tightly closed. Protect against Heat. UV-radiation/sunlight.
When using do not eat, drink, smoke, sniff.
Only use the material in places where open light, fire and other flammable sources can be kept away. Keep away from sources of ignition - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn.
Use protective gloves in accordance with EN 374. Please observe the intended use instructions and permeation times of the glove manufacturer! The indicated permeation times are valid for full contact activities. Full contact gloves should offer permeation times over 120 minutes. Gloves with shorter permeation times are only suitable for short term contact. Contaminated gloves should be disposed of immediately, splattered gloves should be disposed of after the maximum wear time has been reached, at the latest at the end of the work shift. Suitable material for work with short term contact: nitrile-based rubber, e.g. Camatril made by KCL, or comparable products. Material thickness > 0,4mm. Permeation time > 30 minutes. Suitable material for work with short term contact: butyl-based rubber, e.g. Butoject made by KCL, or comparable products. Material thickness > 0,7mm. Permeation time > 30 minutes.
Eye glasses with side protection DIN EN 166
If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn. Respiratory protection necessary at: exceeding exposure limit values. Combination filtering device (EN 14387)
Required properties antistatic. Recommended material Natural fibres (e.g. cotton)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under storage at normal ambient temperatures.
No information available.
No information available.
No hazardous reaction when handled and stored according to provisions.
Acid, concentrated. Oxidising agent, strong. Alkali (lye), concentrated.
Does not decompose when used for intended uses. Thermal decomposition can lead to the escape of irritating gases and vapours. Carbon dioxide (CO2) Nitrogen oxides (NOx) Carbon monoxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The allocation of waste identity numbers/waste descriptions must be carried out according to the EEC, specific to the industry and process. Consult the appropriate local waste disposal expert about waste disposal.
Following consultation with waste management company and after solidification, landfill together with household waste.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- PAINT
- Transport Class
- 3
- Packing Group
- III
Transport in containers with max. 450 litres contents are not subject to the regulations of ADR/RID.
LQ 5 I · E 1 · IMDG 2.3.2.5 (<= 30 l)
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 2C-PUR Topcoat MIO?
The signal word is warning.
What is the physical form of 2C-PUR Topcoat MIO?
2C-PUR Topcoat MIO is a liquid appearing as liquid with see chapter 1. color. It has characteristic like: solvent odor.
What is 2C-PUR Topcoat MIO used for?
Coatings and paints, thinners, paint removers Industrial uses: Uses of substances as such or in preparations at industrial sites Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
What are the hazard statements for 2C-PUR Topcoat MIO?
This substance has 2 hazard statements:
- H226: Flammable liquid and vapour.
- H412: Harmful to aquatic life with long lasting effects.